20 Most Recent Hayward SP3015X20AZ 2 HP SUPER PUMP II SP3015X20AZ - Page 2 Questions & Answers

try filling your hose by holding it in front of the return jet. once filled, hook the hose up as normal

Hayward Pool &... | Answered on Jul 26, 2019

this is a common issue. there is a componant on the circuit board called a voltage limiter. when there are power surges (by hydro company or by using a timer), this capacitor takes the surge to protect the circuit board. in your case, the limiter has blown.
you can either replace the circuit board or find someone to remove the limiter and solder in a new one. (its the round black disc to the right of the front display toward the top) in most cases, you will see a hairline crack in the casing or it may have exploded completely. i usually tap it with a screw driver to show customers the damage. FYI: i usually replace about 50 a year and never had one fail

Hayward Pool &... | Answered on Jul 26, 2019

the rinse setting only cleans out the dirty water in freeboard and pushes sand to pack it. just about impossible for it to not work. if there is water coming out the discharge, you are golden.

Hayward Pool &... | Answered on Jul 26, 2019

there is a relay on the back of the main circuit board that has separated from the circuit. you can resolder this relay quite easily by removing the board.
DANGER: be sure to cut the power to the control box at the main breaker. turning off the breakers in the hayward box will NOT eliminate the power

Hayward Pool &... | Answered on Jul 26, 2019

i find the aqua rite systems to be very helpful in diagnosing problems. if you can describe the problem you are having, i may be able to help

Hayward Pool &... | Answered on Jul 26, 2019

As far as I know, refrigerant is not used in the heating of pools and spas. Sounds like it is just a connection leak and can be fixed by redoing the joint connection.

Hayward Pool &... | Answered on Jul 25, 2019

Check to make sure that there is enough water in the pool and that the weir door in the skimmer box isn't jammed in the upright position

Hayward Pool &... | Answered on Jul 16, 2019

As JerryFin mentioned, there are cracks in the solder on the circuit board edge connector that cause the unit to stop heating randomly. All you need to do is pull the board and re-flow the solder.
cracks in solder-1-u4sqn5xicldc4uqfsahcb5tp-4-0.jpg

edge connector-u4sqn5xicldc4uqfsahcb5tp-4-2.jpg

cracks in solder-1-u4sqn5xicldc4uqfsahcb5tp-4-0.jpg

Hayward Pool &... | Answered on Jul 14, 2019

The pump is not communicating with the control system. Check the comm wire and make sure it is intact and not chewed/worn/damaged.

Hayward Pool &... | Answered on Jul 06, 2019

The first hint i would suggest is only turn selector in clockwise direction always.
not to insult but you must have pump off during selectiong.
Now, The ball valve sounds like it is out of alignment.
because of wear, from going back and forth not rotational.
you can check for alignment by checking to see if you have any flow coming out return nozzle into pool. There should be none during backwash.
pressing the handle down unlocks rotation, so if you are handy remove selector from top of filter, then check motion as you move selector. I have used o ring lubricant to lube parts in selector.
BEFORE DISSEMBLING NOTE POSITIONS OF BALL Inspect how the push down to rotate function.
If lubing is no help creating smooth rotation you may need to replace assembly.

Hayward Pool &... | Answered on Jul 06, 2019

Not finding what you are looking for?
Hayward SP3015X20AZ 2 HP SUPER PUMP II  SP3015X20AZ Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

john h

Level 3 Expert

23504 Answers


Level 3 Expert

85239 Answers

Paul Carew

Level 3 Expert

3527 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hayward Pool & Spa

  • Hayward Pool & Spa

Most Popular Question

super ii pump 2 0 33 two

  • Pool & Spa