i was having the same prob. so i cut the male
conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK
now open up the back of the monitor, take the black female
connector off you
dont need it. you will see a 4 prong female
connector part
inside cut that off too, then
conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it
sounds kinda complicated, but really easy, and now it works great! make sure you use
electrical tape or
something over bare wires