20 Most Recent
Tally Line Matrix T6050 Printer - Page 3 Questions & Answers
T6050 PSIS E 8200 LAN
I guess you are talking about a line of text printed on the T6050 when it is powered on.If this is the case you simply have a network card installed in the printer but have not connected a network cable.To resolve this problem either connect a network cable to the internal network interface or remove the internal network card from the printer if it is not being used.
12/15/2011 12:19:58 AM •
Tally Line...
•
Answered
on Dec 15, 2011
Paper moving fault
If the paper is moving freely in the printer and you are not experiencing any paper jams etc it may be possible the error is being indicated falsely.I would recommend firstly to ensure the tractor feeds on the printer are clean and free from a build up of paper dust etc. As the paper motion sensors are located on the tractor feeds.If after the printer is cleaned the error is still see the problem may be related for a setting for the Paper Motion Threshold in the printer. this is the point at which the printer detects an error. This value is dependant on a number of factors; Paper Type, condition of the printer etc.
- Put the printer OFFLINE
- Press and Hold down LINE FEED and ENTER until TECH ACCESS ON is displayed (approx. 5 seconds)
- Press the MODE button
- Press the DOWN ARROW until TEST is displayed
- Press button 1
- Press the DOWN ARROW until DIAG is displayed
- Press button 2
- Press the DOWN ARROW until PMOTTHR is displayed
- Press button 3
- Press the Either ARROW to set the value to 170 and then press ENTER to save the value.
Once you have completed the above sequence press and hold down the LINE FEED and ENTER KEYS to turn tech access off, you can then test the printer. If the above does not clear the message try increasing the value further.If the problem persits you may have a faulty paper motion sensor.
12/15/2011 12:13:46 AM •
Tally Line...
•
Answered
on Dec 15, 2011
I have a lipi printer t6050. there is a problem showing shuttle fault. tell me what is this problem and how can i solve this
This error indicates the print mechanism is not able to move, in the first instance check;There is no paper jams etc whcih may cause an obstructionCheck the ribbon is correctly installed and is the correct side of the ribbon shieldCheck the platen gap to ensure this is not trapping the ribbon / paper and preventing the mechanism moving.If the above actions do not resolve the problem the next thing to check is the Shuttle Mechanism,Check the drive belt is in place and does not slipClean the rear side of the shuttle weight wheels, the sensor looks at the rear of the balanced wheels.Check the shuttle motor to ensure it is workingCheck for damage to the shuttle drive gears.
I WANT TO SET PAPER
Press START - Printers and faxes - right click Tally Line Matrix T6050 Printer - select Printing Preferences - find menu Paper size, select paper with size 15"x12". If not found, select used define or customize - insert paper size (width and height) - OK.
Set paper size on Microsoft office word 2007 - select Page Layout - Margins - Custom Margins - select tab Paper - on Paper size, select Custom size - insert height and width paper (15"x12") - OK.
Hopefully help
Sir, i hace a tally
INSTALL, GENERIC MANUFACTURED, IBM GRAPHICS 9 PIN WIDE MODEL, DRIVER IN WIN XP
Not able to add printer T6050 to my new laptop
Hi,
Most likely the print spooler service is not running
Now press windows key and the letter R together..
A run box will appear..Now type services.msc and then enter
Now on the right hand side search for the service called print spooler
Right click o it and click on properties.Under the general tab change the startup type to automatic and click on start service
Then click on dependencies..Whatever is listed under the dependencies tab should also be activated
For eg if RPC is mentioned under the dependencies tab you also need to search for that service from the same list and also make it automatic and start the service..This should fix ure problem..If not do reply
Thanks and regards
LONG LIVE THE GEEKS!!
Ribbon shaft error
log on to www.manualsonline.com/.../headline/.../tallygenicom/.../printer/.../product_problem
How to take testpage in printer
Click Start, click Control Panel, click Printers. Right-click on your printer icon. Click properties, click Print Test Page.
Not finding what you are looking for?