Saniflo SaniGrind Grinder Pump (Toilet not Included) - Answered Questions & Fixed issues

0helpful
1answer

Pump continues to work long

I know nothing about the Saniflo system but I suggest you check in the supplied literature if any routine maintenance is recommended and if so I think it would be wise to do that before looking for further explanations (problems).
11/8/2017 2:42:10 AM • Saniflo... • Answered on Nov 08, 2017 • 157 views
0helpful
1answer

I have a saniflo in my basement with a toilet and

Hi mikevinde..
Sounds like you need to disassemble the pump and clean and oil the bearings.
Please take time to rate me
9/18/2011 6:26:45 PM • Saniflo... • Answered on Sep 18, 2011 • 443 views
0helpful
1answer

Local authority state saniflow may choke at rainwater trap and will not accept saniflow going into rainwater drain

Your description sounds like plumbing from before bacteria was discovered. The output from a Saniflo macerator should be sent to a foul drain or cesspit and not a rainwater drain. Some authorities allow local rainwater runoff into foul drains but this situation is gradually being designed out. Could be your Saniflo installation didn't meet building regulations when it was installed. The fact it has been working fine for 2 years doesn't count for anything if it doesn't.
2/3/2018 2:40:25 AM • Saniflo Plumbing • Answered on Feb 03, 2018 • 197 views
0helpful
1answer

Why does it leak from the top outlet?

  1. SANIFLO upflush toilet - YouTube

    ? 6:14 www.youtube.com/watch?v=-F1v6GIbWF8
    Aug 10, 2011 - Uploaded by Regis Saragosti Saniflo is the leader and inventor of the macerating toilet. ...Liberty Pumps Ascent II 1.28 GPF Macerating Toilet System - Install a Bathroom ...
7/14/2015 10:49:41 PM • Saniflo Plumbing • Answered on Jul 14, 2015 • 1,597 views
0helpful
1answer

Saniflo says the bottom of shower should be 8" from floor. But what is the lowest the shower can be and still function ok?? Will 5" give enough slant? Or, how high does the water get in the sanibest u

Sorry but they give you 8" for a reason, they did the testing etc. You might get by at 5" but that will probably just get by and limit the service life.
11/27/2014 9:30:38 PM • Saniflo Plumbing • Answered on Nov 27, 2014 • 384 views
0helpful
1answer

Saniflo undersink macerator keeps trying to pump every 10 seconds or so.

The "tank level" switch is stuck on. You may be able to clear it by cleaning the system/pump with a water hose (outside of course) so you will have to take the system apart then give it a good cleaning. May not help but at least you will have tried.
10/7/2012 2:24:10 AM • Saniflo Plumbing • Answered on Oct 07, 2012 • 428 views
0helpful
1answer

I have a Saniflo which

There is a product called Wham that works very well for this appplication.You will probably have to go to a plumbing supply outlet to find it. Just follow directions on container after you have the system clean and use monthly. It also helps with odor control. Hope this helps you. Thanks.
3/2/2011 11:44:36 PM • Saniflo Plumbing • Answered on Mar 02, 2011 • 811 views
0helpful
1answer

When pump shuts off,there is

The sound you are hearing is the check valve.
Usually this valve is just above the pump.
It's nothing to be concerned about, it's a normal
noise, or it's the nature of the beast.

All my best to you.

LeRoy
11/10/2010 10:17:19 AM • Saniflo Plumbing • Answered on Nov 10, 2010 • 351 views
0helpful
1answer

I have a shower tray and a toilet fitted to a

need more info
3/29/2010 10:10:08 PM • Saniflo Plumbing • Answered on Mar 29, 2010 • 336 views
0helpful
1answer

I HAVE A NOISEY PUMP COULD YOU TELL ME THE

First possible cause which comes to mind is a failing motor bearing. Try lubricatng the bearing and see if the noise changes.

Second could be the impeller breaking apart.

3/24/2010 9:52:45 AM • Saniflo Plumbing • Answered on Mar 24, 2010 • 243 views
0helpful
1answer

I HAVE A PROBLEM WITH A PUMP FOR A SANIFLO

sounds like the pump is jamed with toilet paper or wipes.
You will have to take out the pump to un block it
8/23/2009 12:35:06 PM • Saniflo Plumbing • Answered on Aug 23, 2009 • 493 views
0helpful
1answer

How can I fix a Moen faucet 1225 in the kitchen?

Question edited for correct spelling of maker 'Noen' to 'Moen'. 'Fix' as in it is leaking? Or tighten it down because it is wobbly, or something completely different?

Moen One-handle Replacement Cartridge -- 1225

MOEN https://www.moen.com > products > Moen > 1225 From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty ... "); background-repeat: repeat-x; display: inline-block; overflow: hidden; position: relative; background-size: 14px 11.4px; height: 11.4px; width: 68px;">"); background-repeat: repeat-x; display: block; background-size: 14px 11.4px; height: 11.4px; width: calc(62px);"> Rating: 4.4 · ‎ 31 reviews · ‎ US$33.35

M-Line Moen cartridge -- M1225

Moen https://www.moen.ca > products > M-Line > M1225 Moen Cartridge · Designed for 1 Handle lavatory, kitchen and tub/shower faucets (after 1959) · Replaces O.E.M. 1225 · Backed by MOEN's limited lifetime warranty.

MOEN #1225 Single-Handle Faucet Cartridge

Home Depot https://www.homedepot.ca > ... > Faucet Cartridges It maintains a balanced pressure of hot and cold water. This cartridge assembly is ideal for Delta Monitor 1300 and 1400 series tubs and showers. See less ... In stock

Moen 1225 One-Handle Kitchen and Bathroom Faucet ...

Amazon.ca https://www.amazon.ca > Moen-1225-One-Handle-Repl... Replacement faucet single control cartridge; Fits all single-handle kitchen, lavatory, tub, and shower Moen and Stanadyne faucets; Eliminates hard pull ... "); background-repeat: repeat-x; display: inline-block; overflow: hidden; position: relative; background-size: 14px 11.4px; height: 11.4px; width: 68px;">"); background-repeat: repeat-x; display: block; background-size: 14px 11.4px; height: 11.4px; width: calc(62px);"> Rating: 4.6 · ‎ 5,065 reviews · ‎ $33.34 · ‎ In stock ..
3/25/2024 10:23:56 PM • Plumbing • Answered on Mar 25, 2024 • 21 views
0helpful
2answers

Do you give memenars about pumps

Well, we can have a one on one seminar by the internet.
I've been a pumpman for 20 years. I can share with you
my experience (household pumps, suibmersible pumps,
turbine pumps, gear pumps, piston pumps, dewatering
pumps, mud pumps, trash pumps, mining pumps,
solids handling pump, etc....) Just take your pick. Just
send in your e-mail for assistance. God bless.
1/17/2024 9:59:21 AM • Plumbing • Answered on Jan 17, 2024 • 1,012 views
0helpful
1answer

Who is the best 45 Degree Elbow Manufacturer in Maharashtra?

12/13/2023 10:28:26 AM • Plumbing • Answered on Dec 13, 2023 • 14 views
0helpful
1answer

I need the spray head diverter that spreads out the spray - it snaps onto the front end.

Posted to Home Plumbing category, so one of these https://www.google.com/search?q=vintage+sprayer+spray+head+diverter Or Garden Sprayer like this? You can get a vintage new wand on eBay. https://www.google.com/search?q=vintage+garden+sprayer+nozzle All questions need FULL 'make model (what is is)' as first 3 words. ..
11/26/2023 12:59:53 AM • Plumbing • Answered on Nov 26, 2023 • 50 views
0helpful
2answers

New Sloan flushometer causing water hammer

  1. Shut off water supply to the house at the main.
  2. Open all the cold water faucets, start with the highest faucet (2nd or 3rd floor) and work to your lowest faucet (first or basement floor).
  3. Flush all the toilets in the home.
  4. Let water drain from open faucets. Fix Noisy Toilet ' Stop Toilet Water Hammer or Resonance ' Toilet Making Noise When Filling ' Fix Water Hammer in Toilet ' Fluidmaster
11/18/2023 1:01:01 AM • Plumbing • Answered on Nov 18, 2023 • 1,050 views
0helpful
2answers

Acrylic sheet

Hello. You can heat it up with a torch along the bend line and bend it. Be careful as it get HOT. Joe
10/19/2023 9:44:08 AM • Plumbing • Answered on Oct 19, 2023 • 87 views
0helpful
1answer

My Mirolin bath drain stopper had a spring, which went down the drain when I removed the stopper to clean. Now I'm not sure how the new spring I bought goes back on.

This seems like a system which is proprietary to them, so best to ask their Support staff https://mirolin.com/contact-us/ You could have retrieved the old spring with a flexible magnetic reach tool. https://www.google.ca/search?q=magnetic+pickup+tool https://www.google.com/search?q=Mirolin+bath+drain+stopper ..
10/10/2023 11:30:47 PM • Plumbing • Answered on Oct 10, 2023 • 56 views
0helpful
1answer

Kitchen sink hose broken button nozzle

9/14/2023 5:02:50 AM • Plumbing • Answered on Sep 14, 2023 • 47 views
0helpful
1answer

How do i fix getting water to come out of the faucet ?

Move the lever or turn the knob. Check the stop tap under the sink. Make sure the faucet control knob or lever is tight, There is normally a removable cover that hides the screw..
9/12/2023 6:09:20 AM • Plumbing • Answered on Sep 12, 2023 • 63 views
Not finding what you are looking for?
Saniflo SaniGrind Grinder  Pump (Toilet not Included) Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top Saniflo Plumbing Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Saniflo Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...