LG LP XG2 Multimedia Projector - Answered Questions & Fixed issues

These instructions are taken from page 44 of the User Guide.

Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as below.

Press "Up Arrow", Press "Down Arrow", Press "Left Arrow", Press "Right Arrow", Press "Menu", Press "Enter".

Lamp time will be initialized

This projector is only capable of handling a 150w lamp and it only is rated at 1500ansi lumens. There is no way you can do what you are asking. other than buying a 2500ansi lumen projector

Make sure that your secondary display is enabled on your laptop. If you have an ATI gpu, use the catalyst control center to detect the new display. Most laptops have a function button to enable the second display. It looks like two boxes with a slash between them. On my laptop it is the F5 key. You will have to hold the Fn button and press the key, it might take a little while to change over. Don't panic if you can't see the screen on the laptop, there are three modes: Laptop only, external only, and both. Press the key again to move to the next mode.

Good luck!

unfortunately, lg won't tell anyone outside of their service center how to do this. they even recommend that you send it to them. it's their way of ensuring return business. sorry.

Your matrix is failing. If the unit is under warranty, send it back.

The matrix is the bit that allows light to come through of each colour. If its failing one colour won't get through. If the circuitry is failing, more than one colour wont get through.

FOr most service centers, the only available parts are the modules themselves. There are very few of us left that actually perform component level repairs. In the case of this type of unit, there are no component level parts available as the only "parts" supplied by LG are modules. Dep[ending upon the servicer's experience and the nature of the problem, it is possible that the module could be repaired. This would not be an "authorized" repair, but it is possible. What is the nature of the problem that warrants the requirement of the motherboard?
Dan

your projector must be inspected by qualified service technician to fix the real problem because electrical arcing maybe differnt things.

You won´t find a solution in the manual. You may ask LG for technical support. Bj?rn

That might be better directed to the manufacturer. But here is what I find: https://itigic.com/why-fingerprint-sensor-of-a-mobile-phone-get-hot/ Of course, a phone can get hot from sitting it on a dashboard.

For the LG LED TV, you can find the manual and code information on the LG website. As to the codes for the remote, no I can't find them. BUT they might be in the user guide if the following site is legit. You do have to register to get its download. maxent rc 282 remote manual (suprlative-medai.com) I don't even know if they charge for it. I'm not that game to register. There are sites that sell the remote. I'd make use they sold the manual along with it! Just an idea, considering you have the remote. But it might be easier to pick up another universal remote from Wal-mart. The only other link to the manual turned out to be a guy who said in 2012 that he had the manual and for the person who was seeking it at the time to contact him. That suggests this is a pretty old remote you are trying to find the manual for. But maybe you will download it from the link I provided --at your own risk. Some such links are okay, others not. I would at least install Malwarebytes before trying the download.

Usually caused by overheating. It switches off to protect itself. Anonymous, yours sounds like the bulb has failed or the step up transformer. They used to be an HID arc lamp, but the specs say it is an LED! That seems odd to me. https://www.google.com/search?q=lg+pb62+g+projector+switches+off https://www.flipkart.com/lg-pb62g-500-lm-2-speaker-wireless-remote-controller-projector/p/itmefbk4gweehcvj .. ..

The vertical colored lines that usually show up on a TV's screen is caused by the T-Con board is not working properly. Lots of times this can very easily be caused by from wiring that is not been fully securely fastened.Or the T con board is not working and will have to be replaced.

Your projector will need to be repaired in order for the white lines to stop showing up.

go to set up menu then lamp hours to reset

Hello,

Maybe the paper sensor isn't work properly. Check the sensor.

Your MacBook should recognize the default file system already used to pre-format the LG extenal hard drive at the factory. You'll be able to write and read from it without issue. In fact, if you intend to ever also use it with a Windows machine, using it and leaving it in its pre-formatted state is recommended. As a novice user, I'm imagining you'll use the external drive for file storage. You'll only need to format it specifically for your MacBook if you intend to use it for more specialized MacBook tasks (like using the built-in Mac backup utility). In which case, the instructions to format it for Mac is available here - Format an External Hard Drive or USB Flash Drive for Mac OS

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Make sure the unit is not full of dust.... when it gets hot the video goes screwy...

If it is intermittent, make sure it is not over heating and that it is clean on the inside.

Download the user guide to this projector by the given link here. It has all details. http://www.projector-manual.com/manuals/lg/LG_BX327.pdf http://electronicshelponline.blogspot.com/