Top 20 Bosch Dishwasher NTC Sensor 165281 Questions & Answers

check on manufacturers review sites , there may be something simple like it just needs to have a descaler fluid run through it to clear any debris or dirt contaminating the sensor unit itself.

Bosch Dishwasher... | 878 views | 0 helpful votes

can go on-line and search for a free dowload of the repair/parts manual to locate the sensor. call a local repair man about price of part and see if its easy to replace to find location of the part.

Bosch Dishwasher... | 268 views | 0 helpful votes

Yes, you have to measure up from the line it gives you. It gives you a precise level so mark it and then measure up (or down) from it.
Or place the tripod on a table or something to get to higher position.

Bosch Measuring... | 620 views | 0 helpful votes

Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
Hard Reset:
  1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
  2. Make sure the A-B-C switch on both units matches. ...
  3. Reinstall the battery in the outdoor sensor.
  4. Reinstall batteries and/or power cord into the display unit

Measuring Tools... | 61 views | 0 helpful votes


Measuring Tools... | 105 views | 0 helpful votes

Measuring Tools... | 132 views | 0 helpful votes

Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

Measuring Tools... | 119 views | 0 helpful votes

Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.

Measuring Tools... | 151 views | 0 helpful votes

Give details about the clock. Is it mechanical or electronic?

Measuring Tools... | 132 views | 0 helpful votes

They are advertised as 50 foot range, but the accuracy starts falling off past about 35 feet

Measuring Tools... | 129 views | 0 helpful votes

Battery compartment contains reset button. Press. Will need to re-enter time and date.

Measuring Tools... | 127 views | 1 helpful votes

Radio Frequency communication may come and go occasionally. This can be normal in some environments (e.g. moister climates). If transmitter signal is lost, please wait 2-4 hours for the signal to reconnect on its own.

Here is a link to the User Manual for your product.

Measuring Tools... | 163 views | 0 helpful votes

Place your remote temperature sensor and the inside unit together for about an hour to see if they both read the same or if there is a large difference in the temperatures.

Dashes on the outside temperature reading may indicate that the inside unit is not receiving a signal from the remote. Change the batteries on the remote or change the location of the inside and/or outside units so that they can receive a strong signal between each other.

Your smartphone temperature may be coming from a location that is not near your home. They are often from a weather service. Where is your local temperature sensor located? Is it in the sun? Is it on the south side of the house, or another location where the sun or an air conditioner or other heat source may affect the accuracy of the reading? Try to locate your outside sensor in a shaded location with plenty of ventilation, and away from heat sources.

Measuring Tools... | 145 views | 0 helpful votes

try new test leads first. even if the unit is miscalibrated, you should get the same measurements from the same components/circuits. you'll need to send the unit to a calibration center, or the manufacturer, to get it zeroed out, if you still need to afrer getting new test leads

Measuring Tools... | 142 views | 0 helpful votes

Hello Anthony, I sent you a link so you can find out the manual of the tester Sperry DM-210a and another where you get an explanation of the operation
I hope you can solve your concern
Greetings Franco Dosil

Hola Anthony, te envio un link para que puedas descrgar el manual del tester Sperry DM-210a y otro donde te dan una explicacion del funcionamiento
Espero que puedas resolver tu inquietud
Saludos Franco Dosil

Measuring Tools... | 488 views | 0 helpful votes

Not finding what you are looking for?
Bosch Dishwasher NTC Sensor  165281 Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18520 Answers


Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

60369 Answers

Are you a Bosch Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Measuring Tools & Sensors

  • Bosch Measuring Tools & Sensors

Most Popular Question

our bosch dishwasher water sensor

  • Measuring Tools & Sensors