Blaupunkt RC-04 Remote Control - Page 5 - Answered Questions & Fixed issues


Irrelevant.

Televison &... | Answered on Jul 04, 2020 | 29 views


Videos, but the fixes seldom work if it involves changing boards.

https://www.google.com/search?q=What+board+causes+thin+black+lines+on+the+display

Televison &... | Answered on Jul 03, 2020 | 22 views


A common example of a fiduciary is the trustee of a trust, although anyone can become a fiduciary. If you're going to assist a person in situations where they have full trust and confidence in you, then you have a fiduciary responsibility towards that person.

Televison &... | Answered on Jul 03, 2020 | 22 views


How can I solve it?
7_2_2020_8_33_38_pm.jpg

Televison &... | Answered on Jul 02, 2020 | 146 views


yes all have a remote control

Televison &... | Answered on Jul 02, 2020 | 46 views


try switcing off the power then on again and try to eject the disc early

Televison &... | Answered on Jul 02, 2020 | 20 views


Probably one of five things...

Poor signal strength.
Airborne electrical interference.
Receiving two signals on approximately the same frequency either from a different transmitter or the original signal being received twice due to a reflection by nearby buildings/hills.
A fault in the tv.

Televison &... | Answered on Jul 02, 2020 | 22 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Televison &... | Answered on Jul 01, 2020 | 28 views


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. https://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Televison &... | Answered on Jul 01, 2020 | 29 views


If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
Screen-shots to defective LCD and Plasma panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

Televison &... | Answered on Jul 01, 2020 | 35 views


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
https://electronicshelponline.blogspot.com/

Televison &... | Answered on Jul 01, 2020 | 31 views


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Televison &... | Answered on Jul 01, 2020 | 24 views


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

Televison &... | Answered on Jul 01, 2020 | 21 views


Lots went wrong Hiram

We are FIXYA dot com. We provide information on fixing things like vehicles and washing machine.

We are not who you think we are.
We don't sell anything.
We didn't sell you anything.

You posted to the Category 'Television and Video'.

It is a catalogue of errors Hiram :>)

Go to the website where you ordered the sheets. Go right to the bottom of the page and look for 'Contact'.

Look on your invoice, the extra $14 could be tax and delivery.

Televison &... | Answered on Jul 01, 2020 | 25 views


I Need For Nobel TV Circuit Diagram DCL-2582

Flyback Number

Televison &... | Answered on Jul 01, 2020 | 70 views


L is an inductor and the value is printed on the case usually in ยตHenrys.

Televison &... | Answered on Jul 02, 2020 | 25 views


How to force apps into full screen
  1. Go to Settings.
  2. Select Display.
  3. Tap on Full screen apps.
  4. Toggle on/off to select which apps get to go full screen.
  5. Done!

Televison &... | Answered on Jun 30, 2020 | 24 views


Try turning it up
audio-volume-button-plastic-remote-control-142511215-undefined-undefined-0.jpg

Televison &... | Answered on Jun 30, 2020 | 72 views


Seems to be a safe badged 'Machir' by Walmart. Looks like a standard electronic safe, so the videos will apply. Lock the safe with the door OPEN after setting the code. Write the code down somewhere in your wallet.

https://www.google.com/search?q=Change+code+onn+a+machir+safe

Televison &... | Answered on Jun 30, 2020 | 25 views

Not finding what you are looking for?
Blaupunkt RC-04 Remote Control Logo

Popular Tags

0 questions posted

Ask a Question

Usually answered in minutes!

Top Blaupunkt Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

6554 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33002 Answers

Are you a Blaupunkt Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...