Blaupunkt RC-04 Remote Control - Page 4 - Answered Questions & Fixed issues


check input or source if ok possible bad power board if voltage ok bad screen

Televison &... | Answered on Oct 24, 2020 | 13 views


First check that the source or input is set to TV (RF) port. Some TVs only have the Source/Input button on the original remote. Others have one among the front panel buttons. If this button isn't on the TV itself and you have an universal remote, you may need to try multiple codes to get the Input/Source button to work properly. Getting the power button to work is often easier.

I hope this helps. Every TV that I've used only displayed the Channel Search when the input was TV. It could be in a Setup menu, under Initial Settings or a Channel menu. Please add a comment with the make and model of the TV for more information on where to find the Input/Source button and the Menu location to for searching for channels. (Note: there was a brief period of HD monitors that were sold as HD-ready TVs. However these units didn't have a tuner. They were meant to be used with a set-top (satellite dish receiver, cable) box.)

Cindy Wells

Televison &... | Answered on Oct 23, 2020 | 14 views


What make of TV is it? Most televisions will have a small set of buttons on the side or edge of the Tv.

Televison &... | Answered on Oct 23, 2020 | 17 views


1. Test the wall outlet with another device to see if it is good.
2. Check the TV for damage or a detached cable Has the TV been dropped.
3. Some TV's have a power indicator light. If yours does, is it on? If it is off, the TV is not powering up. The problem may be a bad power supply.
4. Try. the "on" button on the TV itself. Your remote batteries may be dead.
5. Is there an outage by your cable or satellite provider?

You might have more luck getting an opinion of what is wrong if you include the brand and model of the TV in a query or a google search.

This could get involved as a DYI. For example:

https://www.instructables.com/How-to-Fix-a-TV-That-Wont-Turn-On/

Televison &... | Answered on Oct 21, 2020 | 13 views


It's a budget-friendly product adjust by using an internet connection you can convert your Tv into your favourite entertainment player with all the channels
available. Plus, it lets you watch and stream movies, TV shows, photos, and music from your personal collection too. For Roku tv setup and Roku Activation code with
Roku com/link creates an account.

https://www.tvsetuponline.com/

Televison &... | Answered on Oct 20, 2020 | 22 views


Check loose wires

Televison &... | Answered on Oct 18, 2020 | 14 views


verify that you have no image on all inputs. If it remains dark, unplug it and push the power button for about one minute, then plug it back in. See if that resets your TV.

If it remains dark, use a flashlight and angle it against the screen with the TV at a station where you can hear the sound See if you can make out shadows or shapes. If you do, then it is your backlight that has failed.

Televison &... | Answered on Oct 18, 2020 | 12 views


I would like to know if the precision flatview TV can come on without a remote or the remote is a necessity
There is a power switch underneath the TV, so I put it on and the screen hasn't come on, there's just a small red light on left corner at the bottom.

Televison &... | Answered on Oct 16, 2020 | 85 views


Try using the brand "Hisense" in place of Soniq. Worked on Chromecast with Google TV setup... For volume and power it was code 13/13 that worked.

Televison &... | Answered on Oct 16, 2020 | 231 views


Please how can I change my Kangjia kktv K43 43-inch LCD flat-screen TV HD smart wifi network wireless cast screen 40 42 to English language

Televison &... | Answered on Oct 16, 2020 | 1,250 views


You need to press the menu button, and if the menu is displayed, then your input device like a Pendrive, input cable, or HDMI input device is having a problem. However, if you can't see the menu screen, then there must be a problem with the screen hardware.

Televison &... | Answered on Oct 15, 2020 | 13 views


This is a common fault as the set on ageing deteriorates in the connections. There is a high possibility that the components over a period of heating and cooling, tend to bring on a problem of dry soldering. So my advice is to check the set for some loose joints that have played on to give you these erratic shut downs or poor performance.

The best way to check for loose connections is to tap lightly when the set is powered on , If there is change while tapping then it seems that there are DRY solder joints. Remove main plug, the covers - with caution of high voltage, check for dry joints, use a good soldering iron to solder all suspected points.

Sometimes the fault occurs when the set warms up, if so you can simulate the heat using a hair dryer on the suspected areas, try with the power supply, distribution, Processor controller, driver controllers on the A/V related sections. Also the use a FREEZE-IT spray can simulate the components to cool and show up the fault.

Based on the above method you must be able to locate the area of fault and solder the sections. Sometimes large IC's- ones with more pins- tend to have drying in some pins and so cause faults related to the IC's protocol. Have a rough idea of looking into the areas to reduce the time of probing.

Televison &... | Answered on Oct 15, 2020 | 915 views


  1. Make sure that the power sources for all your devices with the TV, digital box, VCR, etc.
  2. Check that your TV is set to the right input.
  3. Unplug the power cord from your digital box, wait for at least 30 seconds, then plug it in again.
  4. If you have an HDMI cable connected to your TV you could also try an HDMI handshake.

Televison &... | Answered on Oct 14, 2020 | 28 views


I think this is a reference to a M Series Vizio TV. Here is a Vizio support page:

https://support.vizio.com/s/?language=en_US

Televison &... | Answered on Oct 14, 2020 | 12 views


go into set up and change region

Televison &... | Answered on Oct 13, 2020 | 14 views


check power settings if not set to go off in few minutes then bad power board

Televison &... | Answered on Oct 13, 2020 | 16 views

Not finding what you are looking for?
Blaupunkt RC-04 Remote Control Logo

Popular Tags

0 questions posted

Ask a Question

Usually answered in minutes!

Top Blaupunkt Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

7003 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34591 Answers

Are you a Blaupunkt Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...