Blaupunkt RC-04 Remote Control - Page 3 - Answered Questions & Fixed issues

The circuit board smells burnt

Look for brown crispiness on it or marks around soldered components. Never a good sign.

Televison &... | Answered Yesterday | 12 views

My TV screen is black but there is a sound

probably backlight issue try shining a bright torch onto the screen up close . if you can see images then you have one or more LEDs blown . as they are in series non of them will work until the defected LEDs are replaced

Televison &... | Answered Yesterday | 12 views

1 Answer

What is Code EO14

Error code E14 means that there is a fault to a water heating or control board fault. Turn off and unplug your washing machine and call a repair person then.

Televison &... | Answered 3 days ago | 13 views

1 Answer

How do I get this remote to sync to my Toshiba Tv

Just managed to see the model number!

Toshiba CT-90325 Remote Instruction Manuals and Codes.

www.directutor.com > remotes > Toshiba_CT-90325_R...

The Toshiba CT-90325 full-function or Universal remote control to operate varios devices and you can program the remote control to operate most of the popular brands of audio/video equipment like a TV, a DVD player (or VCR), or a Network satellite receiver.

Televison &... | Answered 3 days ago | 12 views

1 Answer

Vizio D39hn-E0. Replaced the main board. Why there still a white screen when powered on?

Make sure your LVDS cable is making good connection. Was the white screen your original problem?

Televison &... | Answered 3 days ago | 14 views

1 Answer

TCL Tv. Why does screen flicker?

Bad LED lamps

Televison &... | Answered 3 days ago | 13 views

1 Answer

Supra TV, model stv5099w Y1. What is service code?

Are you asking how to get into the service menu?

Televison &... | Answered 3 days ago | 11 views

1 Answer

TCL model 55s401taaa TV. Why doesn't it work?

If all 3 boards were good then the only thing left is the panel board that is part of the panel and not replaceable.

Televison &... | Answered 3 days ago | 14 views

1 Answer

Where is the factory reset button on a dmr-ez485v vcr/dvd recorder.

With unit stopped, open the disc tray by pressing the eject button. Then press the 'record' and 'play' button simultaneously for about 5 seconds. To reset the unit, if freezes: Press and hold the power button for more than 10 seconds.Oct 30, 2010

How to reset to factory specs a panasonic dmr-ez485v I do not ...

Televison &... | Answered on Jan 15, 2021 | 13 views

1 Answer

Manual for carib ur400l universal remote

Contact Carib directly to request the manual.

Televison &... | Answered on Jan 14, 2021 | 14 views

1 Answer

Having an issue w/ TCL 55P605 TV.OK when powered on.Colors fade gradually.Picture also slowly turns fuzzy.Whole process starts over when I turn it off then on again.Wondering if I can DIY the repairs.

Never heard of that issue before. Repair issues are a problem. That sounds like a component on one of the boards is heating up, failing, cooling a bit and then cycling again.

Here is a cautionary tale I published. Many don't like the advice, but it is the best advice!

https://www.fixya.com/support/r29790007-repairing_own_television

Televison &... | Answered on Jan 14, 2021 | 17 views

1 Answer

Naxa nt5502k. Why is backlight voltage dead on mainboard?

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts or search the site by type in the brand name of your set, at its search box at the right column.. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
https://elektrotricks.blogspot.com/

Televison &... | Answered on Jan 14, 2021 | 15 views

1 Answer

I have tedelex TV old version it controls it self , like it press all buttons same time , what is the problem and solution?

Clean all the buttons on the remote control with a soapy cloth. Remove the batteries. Do it with the remote upside down, press all the buttons. Rinse with clean water. Leave to dry. Put new batteries back in.

Televison &... | Answered on Jan 13, 2021 | 12 views

1 Answer

"No stored channels found. Please run Auto Tuning

If it was working fine before, you have changed Source or Input to an HDMI port, or Cable, Satellite, feed that is empty.

If it is new, read the manual.

Televison &... | Answered on Jan 13, 2021 | 15 views

1 Answer

Hi,I have a 32 inch Harwa plasma tv and when I try to control it using buttons at the back,it says "keyboard lock",I don't have its remote,how to I solve this?

Purchase a remote controller to access the menu.

Televison &... | Answered on Jan 13, 2021 | 13 views

5 Answers

Terrarium tv won't work

probably got hit by lightning. that happened to mine, i had to snap mine open and replace one of the boards. you might get lucky and just need a fuse tho.

Televison &... | Answered on Jan 13, 2021 | 173 views

1 Answer

Pensonic led 3227 blinking not power on

1. Open internal fuse
2. Power supply failure

Televison &... | Answered on Jan 13, 2021 | 82 views

1 Answer

TCL Roku TV. What are Magnavox URC codes?

Use code search on your Magnavox URC to find something that handles some or all functions of your TCL TV. If a search through all codes stored in the URC fails, try a different one.

Televison &... | Answered on Jan 13, 2021 | 102 views

1 Answer

Is there a way to fix what I was told was the problem a power supply failure

10+wellcome to the online job my classmate friend makes at nine hours works and makes 50$-70$ for one month just htt working on the computer for a few hours.why not check here..........www.acashkit.com

Televison &... | Answered on Jan 12, 2021 | 16 views

1 Answer