20 Most Recent Olympus VN-1000 Digital Voice Recorder - Page 2 Questions & Answers

Go to www.olympusamerica.com ..all kinds of downloads there.

I have the same problem, i think it might be a common Problem. have you tried to earse the device?

http://www.olympusamerica.com/cpg_section/cpg_support_manuals.asp?id=1176

Your PDF reader should have a scaling function to make the text much larger.

Hi,

Unfortunately, the files deleted or erased from the dictation machine cannot be retrieved.

Thanks for using FixYa.

You can delete voice by going to particular folder eg Folder A or Folder B on you digital recorder and press erase to erase voice files.


Follow the manual for more help ( download the manual )
http://www.retrevo.com/support/Olympus-VN-1000-Voice-recorders-manual/id/575dj178/t/2/

Hope this helps

If it is a VN-1000 it is not designed to be interfaced with a computer as there is no USB port on the unit at all. If you wish to transfer the files you can purchase what is called a compaticord or patch cable that will connect through the ear jack of the recorder to the mic jack of the computer to be able to transfer the information on to your computer.

Download the instructions' sheet and follow the instructions in the "ERASE" section:
http://www.olympusamerica.com/files/VN10002000.pdf

Ok,Download software for recover your data from Memory Card, Phone, HDD or any other Storage Device ----
Download from the following link ------

http://www.dasofts.com/software/3675-recover-my-files-3.98-build-6218.html


Note- this software is works only with windows operating system so, connect your Memory Card, Phone, HDD or any other Storage Device to computer to recover data.



For any other help contact me.



Thanks

can't record on the my Olympus VN-1000
+ I press rec button and it just shows rec in display (no recording time is shown ONLY rec)
+ there is no play back  or stop function

+ i can only stop  rec by removing batteries (stop or play will stop rec only ONCE - but there is no  useful function - such as play or stop or rec.)
+ I tried all trouble shooting tips in manual  with no effect 
+  i cleaned the spring contacts inside battery compartment that interface with the  batteries
+ it was barely used - and has not been used for a 1 year ( no batteries were inside it )     it was inside a drawer
THANK YOU 

digital wave player needs that codec in order to work... check your codec or update your codec in the audio codecs. also you may need to uninstall the program and clean your registry. have you tried this on another computer?

Question edited for a lot more clarity. Question moved from Olympus Camera category. Olympus seems to think it doesn't exist. https://cs.olympus-imaging.jp/en/support/imsg/vtrek/download/manual/ But I see it on Amazon, unless they are Chinese clone copies. The model numbering of 'S-number', doesn't match apart from the 'W-20'. Write to Olympus and ask. https://www.google.com/search?q=olympus+s924+manual ..

It doesn't look like they ever had them. The Firmware link goes to software and there is no Software link.. https://learnandsupport.getolympus.com/support/ws-331m-digital-voice-recorder#section-download-software It is dangerous getting firmware from anyone other than the manufacturer. https://learnandsupport.getolympus.com/support/ws-331m-digital-voice-recorder#section-download-software ..

It sounds like the water damage may have caused the down volume button to malfunction. While it may be possible to fix the button, it would require opening up the device and performing some troubleshooting, which can be difficult if you don't have experience with electronics. I would recommend taking the recorder to a professional repair shop or contacting Olympus customer support to see if they can assist you with repairs. If the device is still under warranty, they may even be able to provide a replacement.

I don't see a current driver for it at this driver guide site. https://www.driverguide.com/driver/download/Olympus-Digital-Voice-Recorder You may try to see if the manufacturer has one. I provide a link to the manufacturer at the bottom; you have to drill down to a chat opportunity from there. I think you are going to have to run the pertinent software in compatibility mode, probably for XP or Windows 7. You could try running the XP driver on an XP machine if you have one collecting dust. That is, if the driver exists in the links at the old posts below. This recorder has been around from at least 2009. Alternatively, you can try the Olympus chat to inquire if a current driver might work on it. I'm under the impression that installation of any driver for the device is a little tricky at the best of times. Here is an old Fixya page from 2009 that hints at such: https://www.fixya.com/support/t2505481-failure_install_olympus_vn_600pc https://www.fixya.com/support/t16043814-need_driver_digital_voice_recorder_vn https://om-digitalsolutions.com/en/directory/americas.html

Send it in for service. Details on the last page. https://www.gov.nl.ca/education/files/k12_evaluation_vn-7200.pdf ..

not if Olympus or a dealer of them can not get you one

Purchase a new one. They are inexpensive and liquid damage is sometimes not repairable.

It could be full. try clearing some space.