20 Most Recent
Polaroid Polaview 211E Multimedia Projector - Page 9 Questions & Answers
Ricoh Laser Printer SP111 black line printing
There could be a few different issues causing your Ricoh SP111 printer to print black lines on the left side and white blank areas on the right side. Here are a few things you can try to troubleshoot the issue:
- Check the toner level: Make sure the toner cartridge is properly installed and that the toner level is sufficient. If the toner is low or the cartridge is not properly installed, it can cause printing issues like the ones you are experiencing.
- Check the paper tray: Make sure the paper tray is properly loaded and aligned. If the paper is not correctly aligned or is damaged, it can cause printing issues like the ones you are experiencing.
- Check the printer's settings: Make sure the printer's settings are properly configured for the type of paper and print quality you are using. If the settings are not correctly configured, it can cause printing issues like the ones you are experiencing.
- Check the printer's connections: Make sure the printer is properly connected to the computer and that the connections are secure. If the printer is not properly connected or the connections are loose, it can cause printing issues like the ones you are experiencing.
- Check for any other visible issues: Inspect the printer and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the printer, or damage to the printer or its components.
If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.
Shredder is Wilson Jones 130
Oddly, my Wilson Jones 130 auto just did exactly the same thing. I'm the only one that uses it (that I know of) and one day it worked, the next it didn't. There is no paper stuck in it. There are no power lights, nothing works. Does anyone know the location of a reset button or something?
LOST MY MANUAL TO MY
The manual isn't online to my knowledge however I did find a guide on how to program it.
"Turn it on. Push the "MANUAL" button to stop it from scanning.
Push number 1, then push "MANUAL" again. This should leave you on
channel one.
Using the keypad enter the frequency you want to monitor, then push
"E." Press "REVIEW" at anytime to see what frequency is programmed
there. If the review button flashes 000.0000 on the LED readout
display, you might be entering an invalid frequency. Refer to the list
of acceptable frequencies in the Frequency Range Bands below.
Push "MANUAL" to step to channel number two. Enter the frequency. Push
"E." Push "MANUAL" to step to channel three. Repeat this process until
all the (10) channels are full, or you've run out of frequencies to
enter.
Push "SCAN" to start automatically scanning the frequencies. The
radio will stop when it hears someone talking, and resume scanning two
seconds after the conversation has stopped.
Frequency Range Bands:
20 to 29.7 MHz (10 Meter "Ham" Band)
29.7 to 50 MHz (VHF Low Band)
50 to 54 MHz (6 Meter Amateur Band)
136 to 144 MHz (Military Land Mobile)
144 to 148 MHz (2 Meter "Ham" Band)
406 to 420 MHz (Federal Government Land Mobile)
420 to 450 MHz (70cm "Ham" Band)
450 to 470 MHz (UHF Standard Band)
470 to 512 MHz (UHF "T" Band)"
http://newsgroups.derkeiler.com/Archive/Rec/rec.radio.scanner/2006-01/msg00174.html
Hope this helps.
Lockout key
I just bought a replacement from eBay: https://ebay.us/9mUhmN
F2-40 Ar-5618 ?iiiiiiiiiiiiiiiiiiiiiiiiiii
F2 to F40 is a camera aperture.
AR-5618 is a part to a firearm made by Colt Firearms of the USA.
All questions on Fixya need FULL
'make model (what it is)' as the first 3 words in every question, and a clear but concise question that is spell checked before pressing send. As your question is now, it can't be answered.
My bizhub 162 keeps showing paper size error, reset paper size... please I need solution
If your Konica Minolta bizhub 162 is displaying a paper size error, you may be able to resolve the issue by resetting the paper size settings on the printer. To do this, follow these steps:
- Press the "Utility/Counter" button on the printer's control panel.
- Select "System Settings" from the menu that appears.
- Scroll down to "Paper Settings" and select it.
- Scroll down to "Paper Size" and select it.
- Select the paper size you want to use and press "OK."
- Press the "Stop" button to exit the menu and save your changes.
If you continue to experience the same error after resetting the paper size settings, there may be a more serious issue with the printer that will require professional service to resolve. I recommend contacting Konica Minolta or a qualified printer technician for further assistance.
Calculator show that S A M STORCL
the only place that shows the OP's odd collection of letters is here on Fixya.
Just Google
make model manual
All questions on Fixya need 'make model (what it is)'.
..
Not finding what you are looking for?
