Precor 927 Treadmill - Answered Questions & Fixed issues

How long have you let it run for after turning it back on ? Some treadmills have a re calibration test built in and will incline to the max and work its way down. During this time you should simply walk away and not touch anything as it trys to calibrate its self. If not i will need more information on it

Precor 927... | Answered on Mar 18, 2013 | 295 views

I had the speed error on my precor 9.23. When I opened it up I found that there are two little round magnets on the belt pulley with a sensor mounted nearby. This must be how the computer know the speed of the treadmill. I noticed that there were several little metal shavings stuck to the magnets. Not sure where they came from, hopefully not another problem. However, I removed the metal shavings from the magnets and everything worked fine again. If anyone else has the speed error it might be worth a look to see if its the same problem.

Precor 927... | Answered on Mar 18, 2013 | 911 views

hi it seems like the running belt is too loose try tighten it. you should be able to lift the belt up 2 to 3 inches if more then def tighten the belt. after this if the problem is still there then the belt on the motor needs adjusting.

Precor 927... | Answered on Nov 21, 2010 | 196 views

disassemble as much as you can, and dry up all parts. hope that the electrical circuits/parts weren't damaged.

Precor Exercise... | Answered on Jun 02, 2020 | 45 views

It might be the battery. A fully charged battery is required to move the ramp up and down. The battery is like a car battery, if you don't use it then it dies and might need to be replaced.

Precor Exercise... | Answered on May 15, 2020 | 138 views

To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.

Precor Exercise... | Answered on May 09, 2020 | 50 views®-546i-elliptical-fitness-crosstrainer™

use of:

Precor Exercise... | Answered on Apr 25, 2020 | 119 views

Precor Exercise... | Answered on Mar 24, 2020 | 73 views


Precor Exercise... | Answered on Jan 19, 2020 | 104 views

Contact Precor directly to inquire.

Precor Exercise... | Answered on Oct 28, 2019 | 173 views

Are you sure the PSU is functioning? Check it with a multimeter set for DC Voltage. Compare what it is putting out to what the factory specs are.

Precor Exercise... | Answered on Mar 23, 2019 | 174 views

Not finding what you are looking for?
Precor 927 Treadmill Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Precor Exercise & Fitness Experts


Level 3 Expert

8546 Answers


Level 1 Expert

31 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33322 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides