20 Most Recent ACECAD DigiMemo 692 Digital Notepad with 32MB Memory (DM692) Questions & Answers

A FEW PLACE TO CHECK OUT IN THE CONTROL PANEL, OPEN THE CONTROL PANEL AND LOOK IN THE FOLLOWING FOLDERS:
PEN AND INPUT DEVICES
SYNC CENTER
PROBLEMS AND REPORTS

CHECK YOUR NETWORKING AND SHARING FOLDER OUT

CHECK ALL ANTI-VIRUS AND FIREWALL PROTECTION FOR ANY TYPE OF INTERFERANCE THEY MAY PLAY IN THIS WORLD OF TECHNOLOGY AGE.

YOU MAY ALSO HAVE IRQ AND DMA ISSUES

RODGANDYSR

This is what worked for us: After you click on "run as administrator", you return to the online page and click on the online writing icon.
This immediately synchronizes the paper on the pad and the online page.
Also, you will notice that you can't use the digital pen to click commands in the program when the online writing icon is activated. However, you can still use your mouse or touch pad to click on commands. So, you do have to go back and forth between the pen and the touch pad when the online writing icon is activated. 
Hope this helps.
Kathy

Sorry but this site sells no parts nor has any way to look them up.

DICEUS with 13 years experience. SIMFORM for modernizing legacy architecture. ColorWhistle for leads. PixelCrayons for tailoring to your specific needs.

If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired anemployment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut. They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.

Keep a backup on your hard drive or a backup. The backup system is a free service supplied by your internet provider. If you use it daily or after every update, there will never be an issue.

YouTube Backlink Generator https://ovdss.com/apps/youtube-backlink-generator

clarify pi please. if you meant pi to mean main screen picture, you probably have used up your free time on this program.

u need tally 4.5 free software (full ) if u need mail me i will give u link k

This fault / alarm / warning is not listed anywhere and the company is no longer in business. Turn over the console and see if there is a door for a back up battery. It may be warning that it is running out. Do the same with the main control unit. You could also try powering off the main unit for 10 minutes to reset the software. https://www.google.com/search?q=dukane+model+no+acc5+administrative+control+console+chirping This is the unit that drives your admin console http://serialsistemas.com.br/duk/2/85101-0025%20--%20MCS350.pdf ..

http://www.sasseta.org.za/ SASSETA Branch Contact Details Telephone Numbers: Call Centre: 27 (0)11 087 5555 Fax Number: 27 (0)11 205 0046 Switchboard: Midrand E-Mail: [email protected] Address & Map: Midrand Office Physical Address: Riverview Office Park Janadel Avenue (off Bekker road) Halfway Gardens Midrand 1685 Postal Address: P.O. Box 7612 Halfway House 1685 http://www.sasseta.org.za/content/tinymce/plugins/openfile/uploads/FRM_SKA_004_Application%20for%20Certificate%20Re-Issue.pdf

Removing/uninstalling empowering technology popup

BleepingComputer https://www.bleepingcomputer.com > forums > removin... Jul 30, 2020 - This annoying pop up started yesterday, it cannot be stopped. It blinks like a turning signal now. I looked everywhere for a fix or info on ... ..