20 Most Recent Onkyo DV-CP701 Multi-disc DVD Player Questions & Answers

hit the change mode button

Hi this is almost always a laser head assembly issue.sometimes it is an alignment issue too, but it is all to do with the laser head assembly usually.
Below is a couple of links for your service manual use the troubleshooting steps here to isolate and hopefully repair your unit.

http://www.eserviceinfo.com/downloadsm/14263/onkyo_DV-CP701.html

http://www.givemefile.net/smanuals/dvd_players/onkyo/dv-cp701.html
If DIY isn't the way you wish to go? Then simply contact a local or head office from Onkyo and ask for a referral to an authorised service center, make contact here and when in face to face contact then only ask for a "Quote" as to what's wrong and prospective costings and go from there?

change the format of output from ntsc to pal or pal to ntsc

Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__i8ud4

Please go your dvd menu. Check it for PAL, NTSC, AUTO then set it AUTO. If still problem please re route you AV connection to TV. You may use AV1, AV2, S-video, HDMI if they available on your TV/Player.
Regards

Either the glass laser eye lens is dirty and needs to be cleaned with rubbing alcohol soaked cotton swab, let dry and try again. Or just open disc tray and blow real hard inside a couple times and that usually works.

If cleaning doesn't work, then the circuit is faulty and will need to be replaced.

Replace - you can't fix for less than $100.
New are under $50

sounds like the optical pickup is going bad. replace the optical pickup part # 24801016A you can get it at www.vancebaldwin.com . there are four electronis sensors inside the pickup A,B.C,and D. this is the focus and read sensors. the laser must land on all four of the "pads" (sensors) these can appaer to work at first but soon begin to degrade their read ability. the E, F sensors can also cause this problem. no the sensors can not be replaced it's the whole assebly.

Have you tried swapping cables to see if you have a defective cable, or just checking to make sure all the connections are tight? I had strange color when I changed my dvd player and finally traced the problem to one of the component video connectors being slightly pulled off of the back of the dvd player.

You need to post the model number of the Onkyo so we at Fixya can look it up.

@P D Why tag to an 11 year old question? It is 2024, no one uses Universal Remotes. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote Samsung TV remote codes list 4-digit codes 4-digit codes 5-digit codes 6 more rows • Dec 7, 2023

Samsung TV universal remote codes - explained - PC Guide

..

No, no es posible. Solo frecuencia ?nica ..