20 Most Recent
Questions & Answers
Onkyo receiver with no sound
There should be 3 clicking sounds coming from the amp. You amp miss the last clicking sound coming from the speakers ,spk, output terminals. There should be 3 relays on the spk output board. Their 12 contact points may have a layer of black colour oxide. Remove the oxide can fix the problem, perhaps.
1. Unplug the amp.
2. Open the cover
3. At the spk terminal, there is a horizontal board.
4. Look for the 3 relays and take them out.
5. Open the relays and remove the oxide layer by a sandpaper.
6. You need an iron solder, a desoldering pump and solder.
7. If does not help, check for the 24V for the 5 relays. 2 is for B+ and B-.
on Sep 13, 2017
TR SR706 purchased 6 months ago. Unit powers on to
Onkyo USA Corporation
18 Park Way
Upper Saddle River, New Jersey 07458For Dealer, Service, Order and all other Business Inquiries:Tel:
M-F 9am-5pm ET For Product Support Team Only:
M-F 9am-8pm | Sat-Sun 10am-4pm ET
Regional Service Center
2525 West 6th Aven
Denver, CO 80204
Distance: 960.0 miles
Please see below for local Service Centers.
Media Associates Inc.
612 National Ave.
Mountianview, CA 94043
Distance: 33.6 miles
on Feb 26, 2014
I try to connect a
The nature of whatever is on the upstream side of a digital signal is invisible to the device at the other end of the cable. Bits is bits, as we say. The undefined 'satelite to optical audio' device is probably at fault or not set right. PLUS, on theOnkyo you have to assign digital inputs. Read the manuals.
on Aug 11, 2011
Not finding what you are looking for?