Cannon Canon i960 Photo Printer - Page 8 - Answered Questions & Fixed issues

Hold down buttom black and color for 10 second.

Instead of contacting the service center you should check out this link: https://errorcodespro.com/5-fixes-for-the-canon-error-code-b200-solved

programming removal remove fron site then reinstall from software or access cannon web page and seek new up date, should full update online if you don't have disc.

ChampionQQ DAFTAR ChampionQQ Link Alternatif ChampionQQ

To know more about Dell Computers, printers Please visit Our website. If you have any problem with Dell computers, the printer then call us at Dell Technical Support Number 1833-284-2444. Visit:- https://www.contactxpert.com/dell-support.html

Re: PIXMA MX922 prints 2 blank pages only...error 1008

• To try and resolve the issue, please ensure that the paper guides in the paper tray are snug against the paper, and that the cassette tray is fully pushed in. Once has been done, we recommend performing at least three roller cleanings on the printer, be sure paper path is clear and that the paper can feed smoothly.

If you still experience difficulty, we ask that you please call 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays) for further assistance. A Canon technical support representative will be happy to help. There is no charge for this call

http://www.en.rellenadodecartuchos.com/2014/05/how-to-get-rid-of-5b00-error-message-on-canon-printers.html http://www.en.rellenadodecartuchos.com/2014/05/how-to-get-rid-of-5b00-error-message-on-canon-printers.html

Possible faulty part needs to be replaced. http://www.copytechnet.com/forums/canon/96774-leading-edged-not-detected-canon-ipf710.html http://www.copytechnet.com/forums/canon/96774-leading-edged-not-detected-canon-ipf710.html

may be need to reset drum life from the menu check if there is instruction guide inside drum box

Contact Cannon product support website.

http://www.copytechnet.com/forums/canon/24451-canon-ir3300-error-e000002-0000-a.html Thread Canon IR3300 Error E000002 0000 Quoting: wilson Technician Join Date Feb 2009 Location PASIR MAS , KELANTAN

what you need to do is just resetting your machine. 1. Press * 28 * on your machine in a quick move. 2. Select copier 3. Select Err. 4. Select Clear then press O.K 5. Turn your machine off for 1 minute and turn it on again. The error code will not be there anatmoreand your machine will be functioning well.

The Pixma MX330 Line port needs to be connected to a POTS (plain old telephone service) line jack with an RJ-11 cable. A standard corded telephone or the base of a cordless system gets connected to the Tel port on the MX330. The Comcast modem connects devices to the internet. You might be able to use a VOIP (voice over internet protocol) service between the MX330 and the modem. You will need the appropriate hardware (MagicJack, Ooma) in between the modem and the Pixma and get an assigned telephone phone number. Generally, you will need a compatible router to share the cable modem's internet service between any computers and a stand-alone VOIP system like the Ooma. I hope this helps. Please add a comment with more about your Comcast hardware for additional information. I know my home's fiber-optic modem service does support POTS, in addition to the internet and TV service. Each service has their own wiring/jacks that go back to the modem. Cindy Wells

is the telephone line connected correctly? have you try to send faxes? The machine is set to work as tel/fax or just Fax?

if the cartridge is new ( not refilled) the problem maybe is the carriage unit or the logic board, in both cases is better to replace the printer

Hi, please specify the model of your machine, so we can help you

Hi please specify the model of your machine so we can help you out

Hi, it's possible that touch screen is defective .

Hi. that error indicates there is a problem with the fixing motor.

Hi. that is an old model with low RAM memory . big PDF files will take more time to print . that is absolutely normal

Hi. that error indicates there is a problem with the laser unit. almost sure it has to be replaced . if this answer was helpful please rate it .