Cannon Canon i960 Photo Printer - Answered Questions & Fixed issues
Canon I960 inkjet printer color shifts
We are experiencing something simillar with our imagepress. As far as I know, every heavily used Canon (or used for a longer period of time) tends to skew colors towards magenta a little bit. We are dealing with it by reducing magenta in color balance menu for all jobs on the printer, but the result is never perfect (especially in grey where is needed perfect balance of colors).
4/19/2017 10:33:35 AM •
Cannon Canon...
•
Answered
on Apr 19, 2017
•
96 views
Canon irc 2620 is not printing
You need a PCL driver , down load it from Canon.co.uk\ Support, but if it has a Fiery on the back, then you will need a postscript diver, same site.
11/27/2014 8:59:58 AM •
Cannon Canon...
•
Answered
on Nov 27, 2014
•
56 views
How do I open my canon printer to change the ink
Step
1
-
Select the ink cartridge specific to your printer. Canon inks are versatile, so your selection may be as simple as choosing between black, color or a multi-pack with black and color cartridges.
-
Step 2
Turn on your Canon printer. The switch is generally located on the top right hand side of the printer. Open the printer's lid.
-
Step 3
Wait a moment. The cartridge carrier will automatically disengage.
-
Step 4
Put your hand behind the existing ink cartridge and pull the cartridge towards you until it pops out. Dispose of or recycle the used cartridge.
-
Step 5
Carefully pull the tape off the new cartridge.
-
Step 6
Position the new cartridge into the cartridge carrier. Make sure it is facing the correct position.
-
Step 7
Press the cartridge carrier gently until it clicks into place. Some cartridges have indicators to demonstrate that they are properly positioned.
-
Step 8
Close the printer's lid. Print a test page to ensure everything is working properly. ....plz give feedback..
6/13/2014 8:03:48 AM •
Cannon Canon...
•
Answered
on Jun 13, 2014
•
256 views
Wireless printing
you need to set the ip on the printer to within the ip range of your wireless router. Then you need to install a mac book pro driver for the canon i960 on the Mac Pro. THe mac pro should then automatically detect the printer and hook up to it
4/21/2014 1:08:44 PM •
Cannon Canon...
•
Answered
on Apr 21, 2014
•
123 views
How do I change the
You will find the ink absorbers are at the bottom of the printer. The entire chassis has to be removed to access them. When changed you will need to reset the waste ink counter. Srri but as not a uk model I dont have that info.
5/14/2011 8:53:45 PM •
Cannon Canon...
•
Answered
on May 14, 2011
•
205 views
Canon powershot sd600
To "full-format" a disk-drive (or camera memory-stick) means to write 'zero' values all over every recordable surface, in order to make any "previous" files unreadable. To "quick-format" means to discard the Table-Of-Contents, and replace it by a file that says that all the "pages" in the drive are "available" to be written to.
Search online for software that can "crawl" through those supposedly-blank pages, one-by-one, and "stitch" them back together into "files". Search for "data recovery camera memory", or something like that.
8/23/2010 4:49:01 AM •
Cannon Canon...
•
Answered
on Aug 23, 2010
•
54 views
Do you have a driver
hi
go to following link you will find your drivers for canon 1600
http://www.printcountry.com/drivers/CANON_DRIVERS.asp
8/2/2010 4:30:25 PM •
Cannon Canon...
•
Answered
on Aug 02, 2010
•
42 views
How to I access canon s600 ink pad
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on s600)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter
2/16/2010 8:47:05 PM •
Cannon Canon...
•
Answered
on Feb 16, 2010
•
144 views
I followed instructions on cleaning the waste tank of my canon pi
Temporary Fix
This always works in case you need your printer for Emergency ^_^.
- Turn off the printer
- And unplug the printer power cable
- Press and Hold the POWER button
- Plug the power cable again
- The indicator (LED) should be green
- Press and Release the RESUME button, the indicator (L.E.D.) should be orange
- Press and Release the RESUME button again, the indicator (L.E.D.) should be green
- Release POWER button
- Windows will detect new printer and you just have to install it again.
- It will create a copy of Canon i320 printer. Just delete the old one and rename the copy.
- You are done.
2/13/2010 12:36:28 AM •
Cannon Canon...
•
Answered
on Feb 13, 2010
•
177 views
Canon Pixma ip1000 dismantle
Hi there you can try
Temporary Fix
This always works in case you need your printer for Emergency ^_^.
- Turn off the printer
- And unplug the printer power cable
- Press and Hold the POWER button
- Plug the power cable again
- The indicator (LED) should be green
- Press and Release the RESUME button, the indicator (L.E.D.) should be orange
- Press and Release the RESUME button again, the indicator (L.E.D.) should be green
- Release POWER button
- Windows will detect new printer and you just have to install it again.
- It will create a copy of Canon i320 printer. Just delete the old one and rename the copy.
- You are done.
2/13/2010 12:35:30 AM •
Cannon Canon...
•
Answered
on Feb 13, 2010
•
383 views
Cannon MP830 error message 5Boo
- Start with printer off
- Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
- While holding the Power button, release the Resume Button.
- Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
- Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
- Turn off the printer and turn on again
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best
: Pineworks
2/12/2010 11:51:15 PM •
Cannon Canon...
•
Answered
on Feb 12, 2010
•
277 views
My camera is making me sad :-(
This was taken from another
site:
My camera displays “bC” or “Err 99” when I try to take a picture. What does this mean?
BC is an error condition in EOS film cameras, and means one of two things. It either means “battery check,” so try putting in a fresh battery, or it’s a general error condition of some type. If the battery is fine, have a look at the previous section for things to check, especially dirty lens contacts or lens compatibility problems with Sigma lenses. Error 99 is essentially the same error condition as BC, only on EOS digital cameras. The EOS D30 also had error codes 09 and 10, which are similar.
I hope that info helps.
Good Luck!
1/27/2010 4:38:47 AM •
Cannon Canon...
•
Answered
on Jan 27, 2010
•
147 views
Do you know how the cannon irc2620n comes apart ?
firstly, you may need four people, it's a heavy beast. But, you can remove the document feeder, all the cassette trays, the drum units which just pull out, the fineshir if there is one, the paper deck mto the right, the fixing assembly/duplex unit (two clips), Now try again with all this out and if need be - get two stronger guys.
I think you may need the service manual for disassembly procedures:
irc3200 manual is the same -
download here
1/14/2010 8:02:58 PM •
Cannon Canon...
•
Answered
on Jan 14, 2010
•
195 views
Hello,
Hello sir; That 's very difficult to tell, all depend on each color using volunm, but for general speaking about 3000 to 4000.
10/12/2009 5:27:10 PM •
Cannon Canon...
•
Answered
on Oct 12, 2009
•
54 views
My printer cannon ip1980 is now not
1. if the printer monitor says that your colored cartridge has run out, you can press the orange button for at least 5-10 seconds and it will solve your problem. it is called a cartridge reset.
2. if the printer says that it cannot recognize the color cartridge. practically, you need to change your colored cartridge with a new one. However, if you have changed the color cartridge and still the problem is the same, you might have a carriage problem. try to clean the contacts of the carriage and try reinstalling your cartridge again.
I hope I've helped you with your problem.
2/26/2010 10:36:26 AM •
Cannon Canon...
•
Answered
on Feb 26, 2010
•
2,162 views
Not finding what you are looking for?
