20 Most Recent Elna 2005 Mechanical Sewing Machine - Page 5 Questions & Answers

try this link Elna 410 450 Instruction Manual

Hi, please ensure that the power outlet in your new home is providing energy with the same voltage and current that your old house provided. This might not be the case if you moved to a different country. You would need to find an adapter to adjust the voltage and current. If this is not the case, then you might need to reach out to your manufacturer to ask them to recommend the closest repair technician to your location. Thank you.

Hi, a combination of belts, cranks and power help to move the needle in your machine. If you're interested in learning more about the mechanics of your device, you can contact Elna by dialing +41 22 884 86 66 Thank you.

Hi, it sounds like a part of the sewing machine in broken. Try switching power outlets and double checking that the bulb has been tightened . If there are still issues, please setup a repair with Elna by calling this phone number: 1 (800) 992-2991. Thank youl.

check with the elna website first, contact customer servicesewingpartsonline.comsewusa.comsewingmanuals.com

These discs are either single or double discs, the doubles give forwards and backwards movement by the feed dogs moving the fabric as well as side to side movement of the needle. This gives you the "Supermatic" stitches, revolutionary in 1952 when Elna developed this technology. I'm assuming that you have a Supermatic (green) or Star Series SU (white with blue top) Elna model? your model will have a code number on the side plate by the power point, it may be 62 if its a Star, there is some variation in how you select the automatic stitches between these models but the basics are similar. Start first by turning the stitch width selector to zero and stitch length selector to zero.You need to insert the disc into the Elnagraph carefully, lining up the dot marking on the disc with the finger within the elnagraph, there is a little hole underside of the disc where this finger goes into to lock the disc in place. You now turn the stitch selector to "A" for automatic, and turn the stitch width to 4. Always turn your dials back to zero before removing the disc as there is a little feeler that swings over to "read" off the disc and you won't want to damage this.The very early Elna supermatic take a slightly different disc, the finger hole is slightly different to the later machines and they were removed using a little tool. Later models it got easier and you push the middle of the elnagraph silver ring to release the disc.I hope I haven't confused you more, you may want to join the Swiss Elna user group called Elna Heirlooms under yahoo.com groups, its a very helpful group of members and you should find a thread on these machines there.

There is help here, but this type of job is best left to professionals along with cleaning, lubricating and timing. https://www.google.com/search?q=repair+a+Elna+Lock+L5D+serger ..

question edited for clarity. Question moved to Elna. It uses a Compact Flash Card. https://www.google.com/search?q=Elna+Embroidery+sewing+machine+memory+card+type So you need one of these. https://www.google.com/search?q=compact+flash+computer+card+reader ..

in the link https://www.google.com/search?q=Elna+7200+E5+error+code ..

what Make & Model ??

See if it is the same as this Elna 9000? https://www.manualslib.com/manual/1261015/Elna-9900.html?page=27 ..

You need to take it in for service and 'timing'. Everything inside needs to happen at the right time and is adjustable. It only needs doing every couple of years.

Sounds like a timing issue of the bobbin hook.

Possible 2004 manual. Use Comment menu item to let us know if this is what you are looking for: https://www.manualslib.com/products/Elna-2004-719868.html

https://www.manualslib.com/manual/378170/Elna-2002.html?page=1#manual

Something must have come undone mechanically. You will need service unless you want to try and strip the machine to look for it. you have a fault no one else has https://www.google.com/search?q=Elna+Contessa+320+presser+foot+won%27t+lower+far+enough+to+reach+material ..

Question edited for correct maker name and to what I think you thought you were saying. :>D Question moved form Cellphones to Elna Sewing Machines. On the back of the display there is a capacitor that controls the brightness of the display. If you can find and electronics technician to replace it, it will fix it. Otherwise, you just buy a new display board. These is one here for $40 https://www.ebay.com/itm/Elna-9006-Envision-LCD-Replacement-Back-Light-Kit-NO-SOLDERING-REQUIRED-/302572186374 This say the light is adjustable

TEST & SET MODES - Janome Service Videos

http://www.janomeservicevideos.com > 2015/02 PDF MODE(S). Janome model(s):. MB4. Elna models: 940 / 9900. Screen Calibration ... Brightness: Press the '-' and '+' keys to make the screen brighter or darker ... 9 pages // ..

There are a number of videos in this link. https://www.google.com/search?q=threading+my+Elna+Serger You can also Google Elna (model) manual Here is one

ELNA 664 Pro Instruction Manual - ManualsLib

https://www.manualslib.com > ... > 664PRO - View and Download ELNA 664 Pro instruction manual online. 664 Pro sewing machine pdf manual download. Also for: Elna 664. ..

APPARENTLY IT NEED OIL SOMEPLACE