20 Most Recent Kaito KA1101 AM/FM/SW Radio Questions & Answers

Need owner's manual for Kaito KA1101 Radio

read the catalogue/search on net.

Kaito KA1101... | Answered on Oct 18, 2016

I already own a kaito Ka1101 Radio - I have lost

From owner's manual: Press CHARGE button, power indicator will flash in the display for 3 seconds, press number button 1...6 to select charge time from 1 to 6 hours according to battery capacity in flash time,otherwise the unit will exit from charge mode.

regards,
[email protected]

Kaito KA1101... | Answered on Oct 18, 2016

0 Answers

Kaito KA1103 stored with batteries, they leaked. Cleaned it up (carefully) and loaded fresh batteries, the only thing that works is a momentary image of 3 dashes and a colon (:) when I poke reset.

clean the contacts with vinegar

Kaito Audio... | Answered on Apr 20, 2019

0 Answers

I have a Kaito KA2100. It will power on for 2-4 minutes and then loses power, as if it got turned off.

Kaito Audio... | Posted on Dec 21, 2018 | Be the first to answer

0 Answers

Degen de1123 I have lost the battery cover, is it posiable to buy the cover of my little radio

Kaito Audio... | Posted on Apr 23, 2014 | Be the first to answer

0 Answers

Citroen c2 service manual

Kaito Audio... | Posted on Jan 11, 2014 | Be the first to answer

0 Answers

I need user guide for Kaito radio KA12AIR .

Kaito Audio... | Posted on Aug 27, 2013 | Be the first to answer

0 Answers

READERS DIGEST RDA-127 AM FM SW RADIO DAGRAM

Kaito Audio... | Posted on Sep 27, 2012 | Be the first to answer

2 Answers

**** smith A5146 MP3 player - how do i create

Only 1 playlist is allowed. This is called "favourite".

When playing a song....hold/press the = button.

A popup will appear.

Choose favourite.....and it will be added to your favourites playlist.

I haven't found any other way to create a plylist on this device.

Stu

Audio Players &... | Answered 9 hours ago

0 Answers

M2680 YORX I need a transformer 240 volt to??????

Audio Players &... | Posted Yesterday | Be the first to answer

1 Answer

Why does the ptc 6.0 heats up when I connect the second o d EL084 Tube ,in Laney cube 12R,but with single tube it does not heat up.?

Faulty EL84 or bias incorrect or the PTC is faulty.

Audio Players &... | Answered Yesterday

2 Answers

Re: Yamaha RX V670 Receiver Powering Off

I have found there are capacitors failing through the output circuit. Look for 10, 33, 47, etc.. microfarads.In that range. I charge typicaly 150 to $200 with parts on something like this. Larry's Electronics [email protected]

Audio Players &... | Answered Yesterday

0 Answers

My speaker doesn't make any kind of sound when u plug in aux cord like other one does...its like speaker came undone or something...how do I get to speaker wire to make sure its still connected

Audio Players &... | Posted 2 days ago | Be the first to answer

2 Answers

Ipod ma446zp

Not all iTunes video can be transferred to iPod, please make sure your video is compatible with iPod. If the video resolution or video bit rate beyond iPod limitation, even though they are mp4 video, you can't upload them to iPod. For example, some iTunes purchased movie are High definition movie, the resolution is too high to play on iPod, you can't sync it to your iPod. For more information about iPod compatible video, you can visit apple official website. Or you may take a look at this step by step direction, it's about how to convert and put video to iPod, it works pretty well for me.
http://www.dvdintoipod.com/how-to-convert-dvd-video-to-ipod.html
Hope it helps. Contact me if you need further assistance.

Audio Players &... | Answered 2 days ago

2 Answers

McIntosh MC7106 Amplifier not powering up

It can be a variety of reasons but I feel that your amplifier is shutting off after powering on. There is nothing that can be done from the outside but If you are familiar with basic electronics and can attempt to take a look I can try. Open the set after you have pulled off the power, then look into the set and tighten all the connectors and cords. Power on and see where the click comes and goes off. If the relay is not holding on then your protect circuit is shutting it off. Armed with a multimeter turn on the power and check if the main +B power is coming to the output stages.If there is momentary swithch on , then disconnect power and test the continuity in the output stages. If hsort open the leads to the output section and then power on. If the relay stays we have found the fault. you can go on to change the failed outputs. If however the outputs were tested ok, then your fault could be the relay or the protect circuit, Hold a rely for a moment to see if the amplifier powers on, if so check the relay drive transistor , the biasing to the stage. Try this out and I hope my advice helps. Good day

Audio Players &... | Answered 3 days ago

0 Answers