20 Most Recent Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum - Page 9 Questions & Answers

They are here https://www.wheeliegoodmobility.com/pride-colt-executive-sc713-colt-pursuit-xl-s713-mobility-scooter-spare-parts/new-motor-brush-for-a-pride-colt-executive-sc714-pursuit-xl-s714-mobility-scooter.html ..

Nothing to do with FIXYA dot com. We are not who your think we are. You did NOT order anything from us. Refer to the confirmation email you got from whomever you ordered from.

Contact Hyla direct. This is a little known machine. My advice is strip it, clean and lubricate. Can you use a HYLA vacuum without water? Water is the main filtration to trap dust particles in the HYLA System. Though without water, the HYLA can still be switched on but it won't be able to trap dust particles, thus it is not recommended to use without water. https://www.google.com/search?q=HYLA+without+water ..

If it is a carpet cleaner as opposed to a vacuum cleaner, yes you can. 'make model (what it is)' all questions please.

I have the same problem with our machine please please someone help us out.

You will need to install a PDF file reader in order to read PDF files, Adode is the most commenly used PDF file reader and the most commonly found provider of software, the chances are that if your phone cant read PDF files and you cannot install a PDF file reader, you may need to consult your phone manual, otherwise your phone may just simply not have that ability. I hope this helps.

A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped brush roll motor overload, failed brush roll motor or a wiring failure in the wand or nozzle can prevent the brush roll from spinning.

Question edited for clarity, and 'Kenmore' one word. Ideally you need a model number, but Sears is the place for Kenmore parts. They also have great schematic parts diagrams. https://www.google.com/search?q=kenmore+carpet+cleaner+parts ..

Replace the two bottom screws but don't tighten up just a few turns in will do, then using the screwdriver push firmly each screw and this will release the lower part of the cover hope this helps.

Question edited for clarity and maker. Question moved to Vacuum Cleaners. https://www.google.com/search?q=ebk360+power+head+wiring+diagram ..

Contact the manufacture of your vacuum to dee if they sell stiffer rollers/brushes.

176 Country Hills Landing NW, Calgary, AB T3K 5P3 Head Office Hours of Operation: Monday-Thursday: 8:30am-5:00pm

Which vacuum cleaner do you have that has speakers? :>D Feedback is normally only from one reason, and that is where a microphone is picking up audio from the speakers and recycling it. The way to fix is to move them apart. You may be getting interference and that is caused by wires touching.

You probably need to adjust the height. I don't know the make or model number of your vacuum to know if your model is adjustable.

There are many ways to clean stained grout. You could try one of the commercial cleaners sold on the market and scrub it with a brush. You can also try creating your own cleaning solution. This way you will avoid using harsh chemicals in your home, which is always a good thing. You could try making a paste of baking soda and some water and use it to scrub the grout with, or you could spread some baking soda on the grout and then pour some vinegar on it. After about half an hour you should be able to scrub off the dirt easily. In some cases the grout is so dirty, that the only option is to remove it and apply new one. You can check the website attached, the professionals there know a lot about tile cleaning and maintenance.

http://www.breizhbook.com/photo/albums/bionaire-steam-mop-sm-02-manual-474 You can order one from here.

To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on. Please note: In normal use, the Brush bar automatically turns off when the machine is upright and automatically turns on when the machine is in the vacuuming position

Checked your bag if they are full, if bagless check your filter. If still not working maybe the protected temperature fuse blown out. You need to open it and replace the protected blown fuse.

If it is this one, contact the maker. Nearly all battery operated devices have the battery type mentioned on the bottom of the battery compartment. It is likely to be C size or D size, or 18650. https://www.made-in-china.com/showroom/dina761130/product-detailYeAnBZEraIkh/China-Steam-Buster-EV1266-.html ..

switch or wire short need to open up or send it in for repair