Fisher and Paykel E522BRE (1833 cu ft) Bottom Freezer Refrigerator - Answered Questions & Fixed issues

Check the temperature in the freezer, it should be 0 to +10F . Also check for frost accumulation in the freezer on the back wall.

Sorry to hear about your problem.

Sounds like you have a defrost issue. Hence your unit is not defrosting. All of this apply's if your freezer side has ice on it. If not. you have other issues, this does sound funny, but this is why your refrigerator side is warm, or not cooling.

Here is a list of some things that can go wrong.
1. Defective heat coil
2. Defective defrost timer
3. Defective defrost sensor
4. Defective Fan
5. Defective compartment inlet damper (on some models)

You should call a service company to resolve your issue.

Since I tried to help you, Please help me and Rate/Vote on the response. Thanks

Hi,

Check out these tips...they can help you figure out what is going wrong with your refrigerator and why it is not cooling

Refrigerator not Cooling or Fridge not Cooling

How to Defrost Refrigerator Defrost Timer Problem

Water Running in refrigerator from Freezer

Refrigerator or Freezer not Cooling or Getting Cold

heatman101

have you check already its thermostat settings? maybe it is set at higher temp...

the defrost heater or thermostat located on the evaporator coil thats icing up isnt defrosting due to a bad heater or thermostat,or it can be the defrost timer that powers these other 2 parts

If your Fisher and Paykel E521T fridge isn't cooling properly, check the temperature settings, clean the condenser coils, ensure proper ventilation around the fridge, and inspect the door seals for any leaks. If issues persist, consider contacting Fisher and Paykel customer support or a professional technician for assistance.

Question edited for clarity. Based on Reviews, 2007. https://www.google.com/search?q=Fisher+and+Paykel+%22F230%22+review ..

bad defrost timer

Question Edited for clarity, FULL maker name. Question moved top correct category. See page 48. It is just a standard screw in MES appliance bulb. https://spares.bigwarehouse.com.au/images/files/19463_8a6cceaa9082dd9036a69da66cd5adcf.pdf $15.75 https://spares.bigwarehouse.com.au/product_info.php?cPath=64658_64659_64692&products_id=1618505 If it has a cover, there is a video here https://www.google.com/search?q=fisher+and+paykel+fridge+n510t+replace+bulb+replacement ..

It is an alarm state, either it thinks the door is open or the temperature is not within specs. check the door gaskets are sealing properly? Your best bet is to get a service visit.

Edited question to correct spelling of 'Fisher', as they aren't German. ;>) Moved category from Washing Machines to Fisher Paykel Refrigerators. Videos on how to unblock the drain https://www.google.com/search?q=fisher+paykel+fridge+blocked+drain ..

The F2 code on the active smart model relates to an EVAP SENSOR RESISTANCE FAULT which means the resistance of the Evaporator Sensor is outside of the normal range (> 45k ohms). In the first instance - Check sensor connection at the controller but if that does not resolve the problem then the sensor would need replacing.

Turn the Fridge OFF at the power socket, wait 10 seconds and turn it back On. If still beeping, You will need a Service Technician to assist with this. See the site below for more help or to schedule a tech visit.

Try blowing compressed air up the drain tube.

HEY!!!!! If your breaker is tripping it means you have a short circuit - a serious safety issue. Unless you are a qualified electrical tech, for safety reasons refer this one to a pro.

There is a clog in the system of freon contact a technician

Hi! Please check the troubleshooting part of the manual to this fridge. Hope it will be helpful! https://manualsbrain.com/en/manuals/1872784/?page=42

It is difficult to diagnose without providing a model number to your refrigerator however I am wondering it is equipped with an ice maker? It is common for fridges to come with one and many are not hooked up to a water line. If this happens, then the ice maker will continue to cycle trying to get water. The inlet valve in the back of the unit will buzz when there is no water pressure going to it. Please check your owners manual on how to turn the ice maker off if it has one and it is not hooked up. If this is not the issue, then please give a model number for further assistance.

The F15 error code refers to "Low Current from fan" not drawing enough current or open circuit to fan. Check wiring to fan, check fan motor with Digital Muli-meter for resistance - if open circuit or high resistance - replace fan.

9 is too warm set perameters 1-7 you need sevice check to see what lights are flashing ,in what order