Wolf Range F0027WS36 Gas Oven - Answered Questions & Fixed issues

screw is next to the pilot tube where it attaches to the safety valve. unscrew to find the actual adjustment

Wolf Range... | Answered on Oct 27, 2013 | 313 views

If you can hear and see the spark lighting that acually means there is no gas entering. please check that you have have the pilot knob in possition and and and the pilot pibe and orifice is not blocked with dirt.

Wolf Range... | Answered on Jul 29, 2010 | 363 views

Dear Friend,
Pull the oven towards you, disconnect any electrical cord from the wall. Normally the fuse is located right next where the electrical cord enter in the back of the stove. If there is any panel right on top of where the electrical cords connects to the oven, simple removed that cover and there should be a fuse. If not, removed the rear panel where the electronic control panel is. Hope you can find it!

Good Luck!

Wolf Range Ovens | Answered on Sep 20, 2014 | 215 views

I had a Wolf 30F wall oven with a similar problem
after power outage. It wouldnt stop beeping with error message related
to temperature control. My solution was to turn power of at circuit
panel, then reset by pressing and holding the clear button for 5

Also note: in my case I had to close the display
before switching the panel off. When I tried to the reset process with
the panel showing, it wouldn\'t reset.

To reset other
various parts of the control panel Instructions said:

Time-of-Day Clock

Immediately after the oven is installed, set
the 12-hour clock to the current time of day. It may need to be reset
after a prolonged power failure. The clock is visible on the control
panel during all modes. If the upper oven timer is set, the clock will
not be visible in the upper oven control panel display.


1) Touch CLOCK.

2) Touch number pads to
set current time of day.

3) Touch CLOCK or ENTER to start


The time-of-day clock can be
changed from a 12-hour clock to a 24-hour clock. After the clock has
been set, touch TEMPERATURE for three seconds, touch CLOCK, and then
touch ENTER. Follow the same sequence to change back to the standard
12-hour clock setting.

Fahrenheit to Celsius

oven can be changed from Fahrenheit (°F) temperature to Celsius

Wolf Range Ovens | Answered on Jun 04, 2020 | 809 views

i have original papers on those ovens... and can fix them

Wolf Range Ovens | Answered on Oct 27, 2013 | 88 views

model #?

Wolf Range Ovens | Answered on Oct 26, 2013 | 287 views

you proably have an element out

Wolf Range Ovens | Answered on Sep 25, 2013 | 393 views


This means a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.

Wolf Range Ovens | Answered on Aug 31, 2011 | 460 views

My lower oven will not heat up (Model D030FS) in broiler, bake or clean mode.

Wolf Range Ovens | Answered on Jun 25, 2011 | 1,017 views


Wolf Range Ovens | Answered on May 24, 2011 | 396 views


If your electric oven is taking too long to heat or just not heating up right, then check out this tip that will give more detail about your problem.

Oven Problems Electric Oven is Heating Slowly or Poorly


Wolf Range Ovens | Answered on Jan 11, 2011 | 622 views

heres about the cheapest solution to try goto www.marcone.com under contact us there is a 1800 number this is the cheapest appliance parts dealer and the largest in the world .Yes you can replace the ignitors and the leads would be termed as harnesses not quite sure what you are refering to switches that sit on top of gas valves though do you have a site or a picture also send your model number as well and when you goto marcone just get a quoted price from them and then check wolf as well the manufacturer if you have any further questions message me back and please remember when our chat has concluded to rank how this opinion has helped Thanks again Rick

p.s about the most reasonable path would be to take out the ol multimeter and assure that you have the same amount of voltage going to each ignitor in most ovens this is controled by a spark modulator you can also remove each ignitor and do continuity tests on them to assure they are functioning properly as well remember to message me back your model number

Wolf Range Ovens | Answered on Jan 07, 2011 | 192 views

Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking

Wolf Range Ovens | Answered on Sep 28, 2010 | 1,153 views

Hello- Wow-  Sounds like the failure of one of the elements.  Sometimes there's a bright arc welding flash with it too. Look inside oven with flash light and inspect elements. If one of them is burned through, then it must be replaced. In some instances, control boards and other circuits can also be affected, but most work just fine when the element is replaced.     Please acknowledge this posted solution if helpful.                                   Have more info if needed- thanks-  Ed

Wolf Range Ovens | Answered on Mar 24, 2010 | 236 views

did you happen to figure out how to fix this? we have the same problem

Wolf Range Ovens | Answered on Mar 06, 2010 | 735 views

The oven would not work and gave a signal of F-1. Later in the day we tried it again and it worked. We don't know why. Thanks for your help.

Wolf Range Ovens | Answered on Dec 03, 2009 | 155 views

hi friend,

Yes 1st off it sounds like you got no electric to unit! check it 1st!
if ok then its the spark module located on the back of the stove with all the wires going to it. box about 1"x4" long, either blue,black or white. You can get this at any appliance parts store or go to www.marcone.com with your model #

thank u for using fixya


Wolf Range Ovens | Answered on Aug 05, 2009 | 129 views

Indicative of a failed element. Remove the contact leads and test with a meter.

Appears to be a Polish brand?

Amica Cooker & Oven Parts ' BuySpares

www.buyspares.com > amica > cooker-oven > catalogue
Repair your Amica Cooker & Oven appliance with a part from our extensive parts range. All our Amica Cooker & Oven parts are available to buy online. Missing: AS9EGS ‎' Must include: AS9EGS

Spare parts : Amica

www.amica.pl > Amica.pl > Support
Are you looking for spare parts or accessories for household appliances? Take a look at our store! By taking the next step towards the development of user ... Missing: AS9EGS ‎' Must include: AS9EGS


www.amica-international.co.uk > connector > downloads

PDF Do not use the oven until you have read this instruction manual. ... Warning: The appliance and its accessible parts ... Replacement of the oven light bulb. Missing: AS9EGS ‎' Must include: AS9EGS

Amica Cooker & Built In Oven Spare Parts - UK Whitegoods

shop.ukwhitegoods.co.uk > amica-oven-cooker-spare-p...
Spares for Amica built in ovens, cookers and hobs including elements, both fan and oven as well as fan motors, door parts etc. If you can't find the Amica spares ... Missing: AS9EGS ‎' Must include: AS9EGS

Amica Cooking Appliance Parts & Accessories for sale ' eBay

www.ebay.com > Amica-Cooking-Appliance-Parts-Acc...
Results 1 - 36 of 36 - Amica Cooking Appliance Parts & Accessories ... Genuine Amica 507EE1.30HPFGW Cooker Oven Hob Knob 9051787 - White. $30.22.

Lots of spares available online.



Ovens | Answered on Jan 13, 2021 | 145 views

Not finding what you are looking for?
Wolf Range F0027WS36 Gas Oven Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top Wolf Range Ovens Experts

Harjeet s. bola
Harjeet s. bola

Level 2 Expert

49 Answers

ray gallant

Level 3 Expert

71004 Answers

jenifer ronan
jenifer ronan

Level 1 Expert

11 Answers

Are you a Wolf Range Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides