20 Most Recent
Wolf Range F0027WS36 Gas Oven - Page 7 Questions & Answers
1 Answer
Oven door getting too hot
other than checking the door seal itself, make sure its intact and door closes properly. make sure door' doesnt spring back open after closing does the opening along sid look to be even all the way up the side. maybe the oven door opens more than 90 degrees?? if it does id look into replacing the door hinges
Ovens
|
Answered
on Sep 03, 2020
1 Answer
How do we stop beeping of oven with f76 code
Unfortunately, the F76 code means that the control panel/keypad could be faulty for some GE-manufactured ovens. Since the keypad and control board are sold as a single unit, it's not the cheapest fix. Try disconnecting the power to the oven (unplug or trip the circuit breaker) for at least a minute. Sometimes a longer period (5 minutes+) without power helps reset the error code. If the error returns, please add a comment with the model number of the oven. I may be able to find a parts list for you.
I hope this helps.
Cindy Wells
Ovens
|
Answered
on Aug 23, 2020
1 Answer
Whirlpool AKP 202 - - - C error message. What is it?
Hi, you have to switch off the machine for some minutes. After restarting push the "SET" and "OK" together and you will get the service menu, where you have to change "EUR" to "EURN".
If the service menu doesn't activated you have to remove the calbe of display from control unit for some minutes and restart again.
Ovens
|
Answered
on Aug 19, 2020
1 Answer
I have a miele h373b
After a power surge or a power outage that resulted in a surge, voltage spike or transient there is almost always going to be damage to electronic circuitry somewhere in the household, especially to electronics using highly sensitive cmos computer chips, especially when additional surge protection hasn't been provided.
These days such computer chips are found in just about every tv, radio, washing machine, fridge, microwave oven - in fact in a modern household there is hardly any appliance or device that doesn't contain such electronics. A surge or spike in the supply often damages circuitry but doesn't immediately render it useless but weakens the components so early failure is likely but not so soon the power surge is fresh in the memory...
There might be an internal fuse that has failed or the fault might be more serious but only removing covers and checking the circuit with a multimeter will reveal the fault.
Ovens
|
Answered
on Aug 09, 2020
1 Answer
I have moved into a
please download your exact ariston c 34s G1 x ex model user manual as under:
http://www.downloadbooklets.com/booklets/searchBooklet.do;jsessionid=D853DE5228C47CD663A9DB6F6CA04067
Ovens
|
Answered
on Aug 03, 2020
1 Answer
Why did I get a shock on using Timer Electric fan?
The timer electric fan has inside a power regulator, a TRIAC (double SCR) in series with a potentiometer. You regulate the power with the axis of the potentiometer. When the axis is wet you get an electrical shock when you touch the potentiometer. Replace the power regulator please.
Ovens
|
Answered
on Jul 10, 2020
Not finding what you are looking for?
