20 Most Recent Quasar SP-3235 32" TV - Page 6 Questions & Answers

There are many reasons for this fault. Technically it is called vertical retrace lines. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Type in the key prase " My service table today " in the search box of the site; at the top right of the display window, to get gathered posts related to this fault.

I can only suggest that you search online under the make and model number. Anyway, what's the 3digit code for? I think that you need to give a few more details.

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should trouble shoot. Contact any service technician. The circuit will differ with models and versions. Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Gp to the mfg's web site and enter the make and model of your set and somewhere on that site should provide the information you will need. If you can't find it there should a place where you can email customer support directly. Col. Dana Gillespie

Call the company or the store where the TV was purchased.

Here are the three directv codes for your brand of tv Television Video - DVD Audio Satellite Set Top Box Video - VCR Brand: Model (optional): The following codes work with your brand. 10250 10650 10051 Setup Instructions

1. Set the "Mode Switch" to TV.
2. Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
3. Enter the 5 digit Code above.
4. Try your new code and tell us how it worked!

Yearly estimated cost: $25. Cost range of similar models (50" - 54"): $21 - $67 • Based on 11 watts per kWh and 5 hours use per day. • Estimated yearly electricity use of this model 222.5 kWh. • Your cost depends on your utility rate and use. Visit ftc.gov/energy

if its a led tv then its a huge giant o enormous savings , but leds dont last but a couple years with maximum daily use. its a tradeoff

there seems to be trouble in paradise for this tv..try hooking up an antenna ans see if you get the same thing...

Cancel all the timer recordings either past (missed) or future.

Can you still access the menu functions? You can try to re search for cable channels, or antenna depending on what signal type you are using. That or the outage may have ruined your tv

A "freezing" picture sounds like something other than your television. Do you have a cable box or satellite box attached? They fail sometimes and need to be replaced. (You have an analog TV and "freezing" is a digital problem.)

Replace the AC cord. Contact any service technician. Just check it with an other wall plug point. If the plug point have internal loose contact, this type of fault can occur. Electro help