Yes PDV91 9 in Portable DVD Player with Screen - Answered Questions & Fixed issues

...be sure you are in the same zone as the DVD was designed for. The world seems to be divided in numerous zones, and DVD'S from one area will not work from another area. That is why one should not buy equipment when one goes on vacations !

Hi, you can try firmware update online or by usb if it isn't in the last version yet. If this does not fix the problem, you get a eepron problem, so a tecnical espicialist will need to rewrite the tv memory eepron (becouse need a program, a device and the memory flash data). The other solution is replace te main board (motherboard).

Hello Anthony, indicate brand, model and type of equipment you are commenting on, in order to find the best possible solution If the player is a DVD, you should try the Repeat function and see if it allows you to do the repetition without stopping In some previous DVDs it was possible to mark the space of what you wanted to repeat and to do it indefinitely, it was indicated as, A_____B Repeat I wait your answer Greetings Franco Dosil Hola Anthony, indica marca, modelo y tipo de equipo del que estas comentando, para poder encontrar la mejor soluci?n posible Si el reproductor es un DVD, debes probar en la funcion Repeticion y ver si permite hacer la repeticion sin que se detenga En algunos DVD anteriores venia pa posibilidad de marcar el espacio de lo que querias repetir y lo hacia indefinidamente, venia indicado como, A_____B Repeat Espero tu respuesta Saludos Franco Dosil

A Google.com search for the words activate decoder showed the following web site: https://eazy.gotvafrica.com/en/ng/activations https://eazy.gotvafrica.com/en/ng/activations

You aren't going to like this answer - a HDTV does not need a special antenna to receive transmissions. It should work regardless of what TV/antenna combo you have.

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts./

Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. https://homenol.blogspot.com/ https://electrohelponline.blogspot.com/ https://remotesearch.blogspot.com/

A cable converter box will not work that's why when high def cable came into effect people traded their boxes into the cable company but you can go to Walmart and look at the antenna screw into the cable they run anywhere from $25 to a hundred my ex-wife got one at dirt cheap is $75 1 for 25 bucks gave her six channels

no you dont bud Have a flying time!

fixya does not sell items

Do not post a new question, use the email link to answer. The player has failed, best route just replace it.

Clean the disk drive if possible. I've had many a problem with DVD players saying "No Disc". It can be any number of things. On my portable DVD player, some of the problems were traced to one of the following:

• The DVD is not properly set in the cradle,
• The battery power left in the rechargeable batteries was not strong enough and needed to be replaced,
• The Lens needed to be cleaned on the player.

I've had two DVD players stop working in this way, but never figured out why because the repair cost was much more than to just buy a new player. There is a similar problem at this site: Will not play dvd says reading disk then no disk

The most obvious reason is an overheating issue in the Power Supply board. There are other ideas here, but you need to take it to a television engineer to diagnose https://www.google.com/search?q=television+will+suddenly+turn+off+every+4+minutes ..

Check the internet connection. The television can't update if it can't see the internet. Resetting it breaks the previous settings. Just for fun, reboot the router as well and wait 15 minutes until all the lights come back on. Then reestablish the television connection to the router. Harwa is not a make we know here in North America. https://www.google.com/search?q=Harwa+Smart+television.+How+to+restore+Apps ..

general steps: Get the TV remote control and push the "Menu" button and select "Options". Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip". Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button. Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV. Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control. If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.

To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps: Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly. Switch on your TV: Ensure your TV is turned on. Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice. Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted. Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list. Bed.-Anl. H2 Version1 (ruwido.com)

That sounds like it has a backlight fault. A good TV engineer can possibly repair that for you.

Ask your parents. There is no easy way to defeat the parental lock.. https://www.google.com/search?q=Tek+model+L26D10+TV+unlock+code ..

TV maker is Palladium codes are 0560, 398, 391, 446

Try cleaning behind them with electronics switch cleaner spray, but it may be the whole module is faulty. https://www.google.com/search?q=jvc+kw+av50+volume+button+not+working ..