20 Most Recent Kyocera Mita KM-2050 Printer Questions & Answers

Question edited for clarity. Question moved to model category. Instructions for cleaning the paper feed path and the developer. https://www.google.com/search?q=kyocera+km-2050+clean+paper+feed ..

The software will only work on Vista! Time for a new printer.

Doesn't like your paper size? https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00L4-91KewA3vebAYh7Dj9eIe5b7A%3A1610830848662&ei=AFQDYMLlJ4uz5NoP-YqVwAc&q=kyocera+print+mode+error Google make model manual look at the troubleshooting section or use CTRL+F and type 'print mode error', press enter. ..

reseat orignals on DP.

It just means take all the pages out of the document feeder on top and put the whole complete document in again

https://www.youtube.com/watch?v=ZCL7YwPXMnM

What cable usb or network cable

your error is : C210 Paper conveying motor check paper motor remove and check clean with alcohol and than oil it

need firmware update. will have to be done by factory tech

C3100 Scanner carriage problem

• The home position is not correct
when the power is turned on or copying
the document placed on the contact
glass. Poor contact of
the connector terminals.
Defective scanner
home position
switch.
Defective engine
PCB.
Defective scanner
motor.

MR KIRAN now which type of error is that the machine showing alert mi soon you will get immediate answer thanks

heater problem press10871087 after press 163 reast

Zero-cross signal error While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s. fuser related problem

Polygon motor synchronization problem The polygon motor does not reach the stable speed within 20 s of the START signal turning on. Poor contact in the connector terminals. Check the connection of connector YC3 on the engine PWB and laser scanner unit, and the continuity across the connector terminals. Repair or replace if necessary. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Replace the engine PWB and check for correct operation.

check your fuser unit thermistor or thermostat or lamp as the following digita 1087 1087 and put 163

193.165.1.13