20 Most Recent
Redfield Revolution Riflescopes - Page 4 Questions & Answers
Can you repair digital display inside the rangefinder?
Yes. I fixed my dim LCD inside the rangefinder (Bushnell Tour v3 Jolt), by opening it up and reconnecting all the ribbon cables.
Previously, the display numbers were dim, and I often could not read the last digit.
To fix, you need to pull away the rubber grip around the device. It may take some force, and I did rip my grip in a couple of places, so be careful. Then it reveals the screws. There are also screws under the grip at the top of the device. As I won't be pulling it apart again, I superglued it back together. If I anticipated that I would open it up in future, I'd probably use something less permanent, like silicon.
images here:
https://imgur.com/a/CDiJ7pA
1/29/2022 8:59:33 AM •
Optics
•
Answered
on Jan 29, 2022
Speakers are ok but headphone is not working
OK. Speaker works/headphones don't! Sultanrajia, what is refering to! Audio Amp, play-back record, computer, radio, TV, all communication equipment. what. It could be broken wire on the headphone jack plug or it could the headphone aren't working. Maybe some bad wire in the headphone cable, faulty plugs.
By the way, do have a Night Visison optic devise that it can take a look into the night. Also, how does the spearkers and headphone work with the Night Vision Optics? stewbison
11/4/2021 2:10:25 AM •
Optics
•
Answered
on Nov 04, 2021
How much range should my rangefinder have?
The answer depends on the purpose of your
rangefinder and your own requirements. For bow hunting, 100 yards is more than enough. On the other hand, for rifle-hunting you, the range will vary widely depending on where, what and how you hunt and on your proficiency and style. Typically you are looking at a wide range of 200 yards to 800 yards. For golfing again, it depends on the circumstances. You can work with a rangefinder with a range of anywhere between 200 yards to 600 yards. The yardage described here is relative to dark trees. Do not forget to find out what the advertised yardage is relative to - specifications can vary from highly reflective surfaces to deer sized targets.
10/30/2021 2:38:46 AM •
Optics
•
Answered
on Oct 30, 2021
Cut wires on a night owl security system
My cameras were cut on my night owl so on the camera side there is 3 small wires which are green red and white and there is also a grey which is thicker strip back the grey and you'll find a yellow wire those under the grey cover will go spliced into the big white wire on the connector side that goes to your dvr and the wire between the grey and yellow needs to splice onto the outside wire that's between the black cover and white wire on the dvr side also on the dvr wire there will be a red and black wire connect the red wire to the three small wires on the camera and it should work I did not use the black wire because I couldn't find where it connects I have a night owl series vdp2
8/11/2021 2:26:23 AM •
Optics
•
Answered
on Aug 11, 2021
I bought 2 outdoor CCTV.camera RV537B with night
I think I answer you question--when?? Take the good CCTV camera and hook it up to
monitor. Then hook up the CCTV camera and turn it on. Point the working CCTV
camera at the bad camera that is turn on. Now, look at the monitor which is
working with your operational camera. Look at the bad camera while it on, and
see how many IR LED's you can see on the bad CCTV, while it turn on. You should
be able to the IR LED glowing red. If not, then there is a problem with bad CCTV
IR LED's. Short wire, no power to the IR LED's. stewbison
6/13/2021 4:57:23 PM •
Optics
•
Answered
on Jun 13, 2021
Not finding what you are looking for?
