20 Most Recent Logitech S120 2 Speakers - Page 3 Questions & Answers

If its a speaker, YES.

This is for a fuse. DC volts - 1.5 amps. There should be a screw on cap that retains the fuse. These are common fuses and available at most electronic stores.

You can't. The control console is integrated into the system. This is a gaming speaker system meant to connect to a computer or game console.

What model Logitech speaker? What model iphone?

Hello I need to wiring order of this coupling.

s120-quick-start-guide.pdf - Logitech

https://www.logitech.com > assets > s120-quick-st... PDF S120 STEREO SPEAKERS. HAUT-PARLEURS ST?R?O S120. Complete Setup Guide ... www.logitech.com/support/S120. ADJUST THE VOLUME ... this manual.

• S120 Slim Lightweight Stereo Speakers - Logitech

  https://www.logitech.com > en-ca > products > s120-sli... This slim speaker design offers easy setup via any 3.5 mm input and access to all controls on the right speaker. 4.4 Watts Peak/2.2 Watts RMS power produces ... INTERNAL wiring https://www.google.com/search?q=Logitech+S120+transformer+wiring ....

https://www.elektroda.com/rtvforum/topic3093184.html and it looks like they were the only ones to take a crack at it. https://www.google.com/search?q=logitech+z323+connector+pinout Have you tried Logitech Support direct? ..

well doing that new GPU Card now has new GPU HDMIL sound channels so in sound setting change outputs to z323 not told you how the z323 wired to the PC. mine uses, FIBER optics. and never fails. the only way to lost LEFT size only is jacks not fully seated (baring hard failures , of the 323) mine is 900 series, and does fiber. (no hum fiber is king) yours has no such things. you are using RCA jack into the speaker right? NO PC told at all. mine has a custom soundcard, and can do it all, you name it, ALL. the problem is posting not tell at al what PC this is of endless vast. there are. desktops can do it all. laptops not. back of the sub has 2 RCA jacks aux input.both must be good and working back to the PC sound card. the sound card must be set up correcty and the silly (no GPU card told) card, must be output all turned off on hdmi. that is all I can do blind , I can not see what you own or what is connected or not. sorry

The sub woofer is active and should not be connected to amp.

I wonder what the question was ..................... ..

No because the Line OUT to the Sub, won't accept a 3.5mm jack. Logitech audio will only work as one unit, you can't mix and match. They usually make it impossible to get inside them.

You can't couple AC (from transformer) to DC (from a battery)..you will have lots of fireworks if you try

much less expensive to replace the unit than to fix the old one

Sorry Audrey, continuation posts don't work on this site - you need to repost all the information every time you think of something new to tell us...

Maybe the speakers are broken and need to be repaired and the fuses need to be replaced then inside of the speakers. There are people that fixes speakers and see what the problem is and if it can be repaired or not.If the parts can not be replaced then it would be easier to buy new ones than to fix the current ones that you have.

While a loudspeaker in operation is also a generator, being a coil of wire moving in a magnetic field, amplifier design allows for this back emf so it doesn't cause problems so it is doubtful the drive unit is actually creating static. It might be due to damp or mishandling among other causes the speech coil of the drive unit is no longer properly aligned and when moving further under increased bass it is rubbing on the magnet. Dust or dirt ingress can have a similar effect. If it is an active subwoofer it could have an electrical fault (dry joint perhaps or a faulty component creating noise), be overloaded or otherwise mismatched with the amplifier.

right click on volume icon on computer and change audio device

https://www.logitech.com/en-ca/product/speaker-system-z313 The speakers have a 3.5mm stereo jack, does your tablet have a headphone output? Connnect a Male-Male 3.5mm stereo cable between the two, The Logitech does not have Bluetooth or USB, so if you do not have a headphone output, you can purchase a Bluetooth receiver, plug that into the Logitech with 3.5mm cable, and Bluetooth from the tablet to the receiver

Hi Relyn Recopelacion, as you say, your S100 Logitech, is picking up a nearby radio station because the audio input cable could be wrong or because it is not connected to any device and the cable is making antenna Replace the audio input cable and test Comment what happened Greetings Franco Dosil Hola Relyn Recopelacion, por lo que comentas, tu S100 Logitech, esta captando una estacion de radio cercana porque podria estar mal el cable de entrada de audio o porque no esta conectado a ningun aparato y el cable esta haciendo de antena Reemplaza el cable de entrada de audio y prueba Comenta que ocurrio Saludos Franco Dosil

Try eBay they probably have it cheap or Amazon.. Good luck or just google it