Lexmark X4850 WIRELESS All-In-One InkJet Printer - Answered Questions & Fixed issues
Making noise like its printing but nothing comes out on paper
Try to re-seat the cartridges in the printer. Open the printer
cover > remove the cartridges > close the printer cover > re-brick you
printer by pulling out the power supply - black box behind the printer where
the power cord is plugged in, and re-plug after 10 seconds. When the printer
turns on, reinsert the cartridges and close the cover. Try to print a document
again to verify that the problem is fixed.
If that doesn't help, the problem could be due to a clogged print
cartridge nozzle. Please follow the steps below to fix print quality issues
with your model:
- On your computer, go to Start
menu.
- Go to Programs.
- Go to Lexmark 4800 Series
folder.
- Select Lexmark Solution Center.
From the Maintenance tab, select Clean to fix horizontal streaks.
Your printer will then print a page forcing ink through to clean the print
cartridge nozzles.
Making noise like its printing but nothing comes onto the paper
Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.It may be more cost effective to buy a later model and better printer thanreplace the print head.
What is the powerrequirement of a Lexmark x4850
You need to check the manual .
Use ONLY the delivered power cord . If you have bought the device in an official retail shop in W Europe including UK , you may plug it on a 220 VAC outlet . Not in USA ! You would fry the PSU and/or could cause serious internal damage to the device unless a safety fuse springs somewhere .
Best regards ,
fanaudi .
The display reads: the printhead is not supported by the all in one
Please make sure the print head is seating properly as it should.
Another reason could be the contacts of the print head are not connecting properly with the main printer due to dirt. Remove the print head, clean the contacts of the print head and where it seats at the printer. hope this will help
Machine will not print
Yes it is true machine will print because its maybe need some type of repairing or the machine is not a printer of a photocopy
Not finding what you are looking for?