20 Most Recent
Mitsubishi HC100U Multimedia Projector Questions & Answers
Our mistsubishi hc1100 projector has
If you have used it since putting in the new lamp, then it could be the lamp again. Take out the lamp and inspect the bulb through the square opening. Look at the wires that connect to the top of the glass bulb if broken or the bulb is damaged, try to return it under warranty. The other issue could be the lamp ballast or power supply. Hopefully the lamp.
I have 2 SVGA60 Projectors
several reasons, it could be you havent had its 1000Hrs service and is overheating or filter needs cleaning or lamp is past its change time and is generating too much heat or sensor can sometimes come away and drop into light path causing false sensing of temp.
Marc Engineer
MITSUBISHI HC 100 PROJECTOR
Hi there
First try to bypass the box and put signal directly into the Projector from the source - i.e. DVD Player
If the signal still doesn't pick up , try using a different cable.
If the problem is solved , then your Converter Box is faulty.
If the problem still occurs then you might have a faulty Mainboard - as all the inputs on this Projector is situated directly on the Mainboard.
Hope this will help you !
HC 1500 skewed image issue
Hi there
I've worked on a few Mitsubishi's in my lifetime and one of their most common problems is the DMD Board that goes faulty and this makes the image go all pear shaped.
If you've only had the unit for 3 months now it should still be under warranty and the warranty covers these kind of repairs.
Hope this helps you !
HC3800 Mitsubishi color wheel model or part number?
The Mitsubishi HC3800 projector uses a color wheel with the model number VLT-HC3800LP. This is the original color wheel that is designed specifically for the HC3800 projector, and it should be able to replace the existing color wheel in your projector. It is important to use the correct color wheel for your projector to ensure optimal performance and avoid any damage to the projector.
You can purchase the VLT-HC3800LP color wheel from Mitsubishi authorized resellers or from the Mitsubishi website. You can also check for other electronic resellers or online marketplaces for availability and pricing. I recommend you to confirm with the seller that the part is compatible with your specific projector model and serial number, before making the purchase.
It's also important to mention that, replacing the color wheel should solve the noise issue you're experiencing. But, it's always recommended to check the projector warranty status, or if the projector is out of warranty, consult with a professional technician before attempting to replace any part of the projector.
Hi. I have two
Cartridges go dry and are not usable. Get new cartridges and try again.
Not finding what you are looking for?