- Page 7 Questions & Answers
My Harwa 32" says tv lock on the top right corner and I don't have the remote.how do I unlock it?
It is impossible to unlock it, without its original remote control. No universal remote control will go. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; and by Online shopping
77 views | 1 helpful votes
Any one know, how to Factory reset NIKAI CURVED 32inch TV
Hold down the menu button on the top or side of your TV for at least approximately 10-15 seconds and the screen menu will show up on the TV's screen asking you to enter the time, date and location settings. Follow the onscreen instrucitons, and once done your TV will reset to factory settings.You guys could call a TV repair person to have a look at it.Or it might be dead now and need a new TV.
41 views | 0 helpful votes
Telefunken trp0043 half screen
Hello there, first of all, check all your cables and connections, if there is a loose cable it may be the cause of your problem. Other possible causes may be inside the screen itself or the main board. If it is the panel or screen problem or the board problem a well trained technician should deal with it.
15 views | 0 helpful votes
Not finding what you are looking for?