Top 20 Proton MM2701VT 27" TV - Page 6 Questions & Answers

First, make sure that the source is set to TV. (Use the TV button at the top left of the remote to ensure that the TV is being controlled by the remote. The Source button is the one to the right of the Power button on the remote. It's the top button on the side of the TV. ) Next press Menu. (On the remote, it's the button to the upper left of the arrow keys. It's the second button from the top on the TV side panel.) Use the Up/Down arrow keys to navigate to Channel. Press Enter. (Note: the channel buttons at the bottom of the side panel buttons match the Up/Down arrows of the remote. The Source button on the TV is the Enter key.) Press Enter again and use the Up/Down arrow keys to highlight your country. Press Enter. Navigate to Auto Store and press Enter twice. Wait for the TV to go through the channels and test for signal.

You can also add channels manually by using the Manual Store option. If you know the channel number, you would then choose Channel and select C (over-the-air) or S (cable) and then the Right arrow key. Use the arrow keys to highlight the desired channel. Press Enter. Use the arrow keys to select Store and press Enter again. Otherwise choose Search. Use the Up/Down arrows to select a channel. Press Enter, go to Store and press Enter again. Repeat this for each channel.

The manual for the LE26R73BD is available on the support page: . The current link to the manual is

I hope this helps. If you use a set top box with a non-RF coaxial cable output to the TV, the channel option will not be available.

Cindy Wells

Televison &... | 60 views | 0 helpful votes

Probably the power supply needs to be replaced. "Resetting" is unlikely to work.

Televison &... | 57 views | 0 helpful votes

A modern digital tv is as much computer as tv and consequently has much circuitry that is highly vulnerable to voltage surges and transients and while the sort of surge protector you use with your computer would offer some protection from mains borne nasties, if an outside antenna is used an additional pathway for damage is provided that is impossible to protect from short of disconnecting whenever a storm is likely. A lightning strike isn't necessary to cause damage to sensitive circuitry.

You might be lucky, although it is unlikely to be a fuse, it could be or it could be an easy repair, though in my fairly limited experience the tv is unlikely ever to be quite the same ever again...

Televison &... | 24 views | 1 helpful votes

All universal remote controls do not handle all device functions.

Televison &... | 53 views | 0 helpful votes

Order by make and model, not by size.

Ecco Spa Filter - Spa Filters - Pool City > products > Spa-Filters > 632_Ecco-Spa-Filter
Replacement Filter for Ecco spas 50% open ABS free flow cores maximize water flow through REEMAY filter media Antimicrobial end caps resist chlorine ... Missing: size ‎l460

Ecco L-460 Hot Tub - Ecco Spas - The Great Escape > products > 1874-ecco-l-460-hot-tub
Specifications: Size: 78" x 84" x 33" Jets: 30 Adjustable Seats: 6 adults Gallons: 130 Pumps: One 5.0 bhp / or Two 6.0 bhp Electrical...

Ecco Spa Filter - Spa Filters & Cleaners - The Great Escape > products > hot-tubs > 4463-ecco-spa-...
Replacement Filter for all Viking spas except Viking 1 & 2 models Diameter 6" Length 7" 5/8 Hole 1.9" Missing: l460 ‎' Must include: l460

Dynasty Spa Parts - Dynasty hot tub covers > dynasty-spa-parts
Find your dynasty spa parts by clicking on links below. PARTS FINDER (Serial Number Needed) · SEARCH BY PART NUMBER · FILTERS · FILTER HOUSINGS.

Televison &... | 261 views | 1 helpful votes

Do the following if you wish to change your PIN:
  1. Using your remote, from the main Fire TV menu go to Settings.
  2. Then go to Preferences.
  3. And select Parental Controls.
  4. Using the remote, type in your PIN.
  5. Select Change Pin.
  6. Enter your PIN.
  7. Enter your new PIN.
  8. Enter your new PIN again to confirm it.

How to Set Up Parental Controls Amazon Fire TV Stick ...

Televison &... | 34 views | 0 helpful votes

Request the manual from Devant.

Televison &... | 32 views | 0 helpful votes

Depends on the media receiver and on the tv.
The modern way with digital media is to hook up using a hdmi lead but older tv sets don't have hdmi sockets, unfortunately modern media receivers don't provide analogue outputs.

With a modern tv it is sometimes necessary to select the input to be used from an onscreen menu.

Televison &... | 65 views | 0 helpful votes

Try turning it up

Televison &... | 88 views | 0 helpful votes


Televison &... | 36 views | 0 helpful votes

Sorted then.

Televison &... | 16 views | 0 helpful votes

The PIU and APIU boards cannot be installed in the same OSN 1800V. Install the PIU board only in a DC powered chassis and the APIU board only in an AC powered chassis.

Televison &... | 33 views | 0 helpful votes

some problem require testing and we do not have any facilty to do it

Televison &... | 28 views | 0 helpful votes

Not finding what you are looking for?
Proton MM2701VT 27" TV Logo

138 questions posted

Ask a Question

Usually answered in minutes!

Top Proton Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

ray gallant

Level 3 Expert

69242 Answers

Are you a Proton Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Proton Televison & Video

  • Proton Televison & Video

Most Popular Question

sharp aquas t v about 3 years old turns

  • Televison & Video