20 Most Recent Hifonics XXV Sampson Car Amp Questions & Answers

for loud bass is 120Hz the freq. and adjust the audio gain in scale 1 to 10 in 7.

Capacitors are static semiconductors, they don't beep and they don't display zero. You're overworking the system or you have bad connections. Contact the maker direct under warranty. https://www.google.com/search?q=Brutus+Hifonics ..

Question edited for clarity. The manual for the TXi 4400 / TXi 6400 / TXi 8400 is probably close enough and is in the link. https://www.manualslib.com/manual/750566/Hifonics-Txi-4000.html?page=13#manual https://www.google.com/search?q=hifonics+txi6006+manual ..

My bad but I'm new to this website I don't see any answers here is that because there are none ? Or do I need to click on something to view the answers ??

Perhaps this is helpful. https://www.manualslib.com/manual/626584/Hifonics-Bxi1600-D.html#product-Brutus%20BXi1600%20D https://www.crutchfield.com/S-kExtbyINWHs/learn/learningcenter/car/subwoofers_wiring.html

Your amp could still have a short not allowing it to provide audio to your speakers. Confirm that your speakers are not blown. Use VOM meter to confirm the ohm rating.

This means that the remote wire is 0V instead of 12V. Try to connect it over from the 12V to check if it powers on.

MKe sure you have 12 vole coming from m your remote will re after your system starts up.

Run a dual 2ohm sub on it. Bridged parallel. That will give you your max. 600rms/1200max I’m happy to help further over the phone at https://www.6ya.com/expert/chris_7f7f91eb941fb23f

There is nada wrong with your preamp and changing it will accomplish nothing. If your channels are allegedly clipping it is due to the fact that it is being over driven. A bad preamp could not over drive your amp! Have to be careful with tone controls at high levels. Every 3db increase compels amp to double power at that frequency. So if you are blasting at 2000 watts and you boost a control by that amount, your amp will put out 4000 watts and clip. If plus 6db then it is 8000 watts!

Some amps will not power up internally if u donot have remote wire. Also if u connect power then remote wire it will not power up until u reconnect in correct order. But if all that is ok. Than u have a bad amp

Shuts off or sound goes out???