Staples SPL1506X (CrossCut) Shredder - Answered Questions & Fixed issues

Yes it does. However, opening it up to get to the fuse will void your warranty. After ensuring the shredder is unplugged and you are at a point where you are out of warranty, the shredder can be opened, the shredder engine and blade assembly can be carefully removed and you can see the fuse. Be wary of the shredder blades at all times.

Some shredders have an overload protector that cuts off power to the motor if it gets too hot. It may have failed.

The motor may have failed.

One of the switches that senses the presence of paper may have failed, or the switch that monitors bin fullness.

Or, the on-off switch could be bad. If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Try MFG website, or email their customer service. or try manualslib.com

Check the bin/door sensor there might be paper stuck inside preventing activation, failing that check the main fuse

The motor runs reverse even when in Auto mode, how do I fix it, and why did it happen

Daniel: Unplug the shredder... Take the top off and turn it upside down. Use a screwdriver to take the lower cowling off and look at the motor. If the mounting area where the motor sits looks melted at all, the machine is toast. If the motor mounting area looks good, look at the slot where the paper is inserted... there should be a sensor (that "sees" the paper when you insert it) at the paper slot. Check to see that the sensor isn't damaged.

Hi

Well linda in every shredder there is a small sensor flag which trips to make the machine know that the paper has been inserted. Hence there may be some problem in it. Try to check the sensor flag normally black in color and it wiggles when paper is inserted.

NOTE:
DO NOT PERFORM STEPS BY KEEPING SHREDDER ON MAIN SUPPLIES.

Disconnect it first and then try.

These shredders have a "paper in" sensor. This is either optical or mechanical.
Sounds like the sensor is blocked and therefore "thinks" there is still more paper left, and this is why it keeps going.

Before you do anything UNPLUG THE SHREDDER.
The sensor is located about in the middle and at the level of the blades.
If it's mechanical, you should see a little finger, else it is electronic.
Shine a light in the area and you should be able to spot where the blockage is.
A shot with compressed ais usually gets rid of the offending particles.

After you're finished working on it, set it back securely on the basket and plug it in.

https://www.mybinding.com/media/manuals/swingline-assorted-breeze-automatic-staplers-42131-manual.pdf https://www.youtube.com/watch?app=desktop&v=QkkQH8vY9zM

Usually a jammed or bent staple in the throat at the end.

Question edited for clarity and typos. Either mains voltage instability, or the internal switch has gotten a 'hair trigger'. Clean and lubricate. https://www.google.com/search?q=rapid+5080+electric+stapler+troubleshooting ..

It is likely that you are having a mechanical problem with the stapler in this situation. Check to make sure the spring-loaded chute is open and not jammed in the closed position after making sure the stapler is empty of any staples. Try putting the stapler arm back into its resting position by applying pressure on it. If this doesn't work, you'll probably need to disassemble the stapler to find the problem and fix it.

You can find a replacement from this eBay listing: https://ebay.us/9mUhmN

logic says to try staples....

Toll free telephone number on first page of the manual at the link below: https://www.manualslib.com/manual/770121/Staples-Spl-Txc122a.html Staples SPL TXC122A Operator Manual

ask or go into a staples near you

The back of the Screen at the bottom there are two small screws just move the back cover and you would find to replace the battery. Posted on Aug 03, 2022

The back of the Screen at the bottom there are two small screws just move the back cover and you would find to replace the battery.

https://www.fixya.com/support/t18412900-staples_shredder_spl_txc15a_power

staples web site or customer service