ION Audio iPROFILE LP to iPod DJ Conversion Turntable Docking Station - Answered Questions & Fixed issues

No, unfortunately the device was only meant for LP to iPod or LP to computer type connections, and doesn't support normal itunes syncing.

Hi, you need to use a pre amp between the turntable and ipod to up the output. Alternatively you can run it through a mixer or amp with dedicated phono input. styluscity@gmail,com

Is it just the matt that records sit on that's the problem or the whole platter? If it is the matt you can peel it off and get a new one from somewhere such as as Amazon. It doesn't have to be the same brand as the turntable as long as it fits on. Just search for "turntable matt". If the platter is the problem it might be caused if the platter is plastic by either a chemical or heat warping the platter. Has it been exposed to the sun for example? Some chemicals such as oil and polish can cause it to bend out of shape. It's likely if the platter has warped that it will need to be replaced.

Yes.

Try this software. Audacity it's free. Audacity Mac OS

Buy a multi voltage adapter online.

If your ION turntable is a USB basedwith a USB plug it will work. Just plaug it into your USB posrt. A driver may need to be downloaded from the ION website for windows 7

Just go the makers website they might have a PDF of them

Adjust the weight on the end of the arm, till the rumble sounds stops, but the stylus stays in the groove. It's trial and error doing this I'm afraid.

Uninstall the upper and lower filters scroll down to how here: support.microsoft.com/mats/cd_dvd_drive_problems

Also, this can be as easy as your burning software as have that problem allot. Download the below ad try doing something on the drive: www.nero.com/eng/downloads-nero8-trial

Hope helps.

You don't actually say to WHAT, or if you used the applicable manual(s)... It does take two to tango, you know.

You might find the manual for the TT here...

Register and download the manual for free audio.manualsonline.com

http://audio.manualsonline.com/search.html?q=ion+turntable

"PHONO" is the only designated connection on a receiver that is literal and exclusive. Nothing but PHONO will work right on it and old-school turntables would require it to preamplify the tiny current produced by a Phono cartridge.

If your unit doesn

I suspect your mac has the microphone mixing in with other inputs. BIG BROTHER may be lstening, too. Find your mic control and turn it off.

Hi.
Firstly if you have lots of USB items plugged in, remove them as sometimes you can pull to much power from the usb sockets and things start to malfunction.
CHeck ALL the setting within the program. You usually are required to assign the external contoller and ouputs if they are not selected automatically. Also check (If using pc) that your product is comaptible with your computer spec and that there are no hardware conflicts. You should check ION's support pages for any updates that may fix any known bugs or problems.

There's a quick start guide from the ionaudio web http://www.ionaudio.com/lp2cd Just print the first 14 pages.

Carl

Check that Sound Control Panel on your computer. The level could be set wrong or even switched off.

If you email their technical team direct on [email protected] they'll email you the user manual which is easy to follow

Try reducing the audio imput to your computer and make certain the computer microphone isn't switched on during recording etc. IE the Sound Control on your computer (such as SoundMax).

When I was young I taped a penny on top of the head above needle.Those were the great days 45's rules.

READ the manual-go to control panel, open sound, choose the playback tab-click on the speakers not the USB Audio Codec-click ok.