20 Most Recent Samsung DMR57LFS Stainless Steel Builtin Dishwasher - Page 8 Questions & Answers

Sounds like a water leak. Could be a good idea to turn off the dishwasher, cut the electricity and water and check for leaks. If no leaks found, wait a few minutes and turn on electricity & water back on.

This was a ROTTEN design from the beginning! One is compelled to buy replacement hoses at $90+ and THAT is a rip! What's more is these hoses are DESIGNED to self-destruct because they are made so poorly. Get your Service Manual here: Samsung DMS500TRS XSA Service Manual Download My girlfriend (of many years ago) asked IF I could connect a 'standard hose' instead and I DID! Look at page 5-6. I replaced Part #F256 with a "standard" washer water solenoid! That part was about $10 at the time... Actually I just found a used one for $3.95 on eBay including shipping, but I recommend a NEW one! "washer/dryer Water Inlet Valve for Samsung DC62-30314K" eBay: 381654134550 About $18.50 shipped! (*careful as you shop ~ watch SHIPPING charges) You could try a 'independent' washer repair shop and perhaps save money and time there? None found at LOWES or H.D. Just watch the OUTPUT size to avoid adapters! (sample photo) I add that my girlfriend was more than willing to connect the hose to the kitchen faucet manually each time... But she never needed a "aquastop" again and I think she got up to hose #4 and she was ready to push the washer to the curb! Boooo. Anthony (SAY Thank You!)

Check to make sure there is no food left at the bottom of the rack, then check to make sure you are adding the correct dishwasher soap that Samsung recommends to use with the dishwasher. If this is not working you could try using heavy duty dish washing cycle or try rinsing off your dishes before placing them into the dishwasher this reduces food buildup at the bottom of the dishwasher and helps clean your dishes better

starrt on 23 there is no reset http://kitchen.manualsonline.com/manuals/mfg/samsung/dw80f600uts_1.html

Most likely a failed control panel.

Try this: https://www.manualslib.com/manual/674285/Samsung-Dms300tr.html

I am supposing it is a "built-in". If so, the first thing to check is the circuit breaker in the circuit breaker box, to see if it is tripped. If it is, you can re-set it. However, if it will not reset, you may need the services of an electrician to fix it. The next thing that could go wrong would be the door switch. If it is broken or not working, that would keep the machine from starting. Finally, and least likely, would be the control panel inside, which could have failed. God bless your efforts.