20 Most Recent
Fisher and Paykel DishDrawer DS605FDSM Stainless Steel 23 in Builtin Dishwasher - Page 8 Questions & Answers
Top drawer not closing all the way how do I fix
Yes, but it's kind of hard to explain with text and no pictures. Basically, you have to find and press on the catches at the front of the glides, so you can push the glides back about 2 inches. Then push the left glide in all the way, and you can lift off the drawer from the right glide and rotate it 90 degrees CCW and rest it on the floor. The most common reason for the drawer not going in all the way, or not wanting to pull the drawer in, is a bad spring/trip assembly which is part of the glide - which means you have to change or both glide assemblies. If you need further help, reach me via phone at
https://www.6ya.com/expert/ronald_e6b9572cebe3ad27
Why does my Fisher and Paykel DD605SS stall part way through wash cycle?
I'm not sure of this, because the manual does not have an error with a E. I can fine error F4. It says it encountered a faulty temperature sensor or element. If the heating element burned through the night you circuit breaker tripped (Sure it was not the ground fault circuit breaker?), then the dish washer can't heat the water, so the program can't continue. The program stops (waits) till the chosen temp is reached. If the water stays cold the program can't go on.
So also check the heater in the machine. I hope you are aware everything in the machine runs on high (or at least dangerous) voltages, so be careful not to work in the machine when it is still connected.
Not finding what you are looking for?
