20 Most Recent Eclipse CLD2 MP3 Player - Page 7 Questions & Answers

Hi there, please get the compatible driver here :
www.driverskit.com/MP3.html
www.nodevice.com/driver/category/MP3_Player.html
www.freedownloadscenter.com/Best/free-mp3-driver.html
www.driverslab.com/drivers/MP3/iRiver/15/56.html
www.samsung.com/us/support/downloads
Warm regards, Jay__09iou8

Have you tried charging it from an electrical outlet instead of a usb cable? leave it there for at least 30 minutes then try again. This has solved some issues with music players and cell phones.

kc

Most situations like this are due to the music being in the wrong format. It will say on the packaging what format it needs to be in and then you will need to convert your library to that format. If your music playback application doesn't support this conversion you can download itunes for free and use that to convert all your tracks

Click on this link for instruction on convertingmusic files to mp3 file format :-
http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

Well, im having the same exact problem. I recomend that you not waste your time to find troubleshooting on the internet because there is none. Just call their technical support at 580-272-0035 because they are probably the only people who can help you. (they are closed for the holidays so call monday)

Please get it here :

www.ptf.com/eclipse/eclipse+mp3+drivers/
ptf.com/eclipse/eclipse+mp3+driver+software/ lki

Please get it here :

www.ptf.com/eclipse/eclipse+mp3+drivers/
ptf.com/eclipse/eclipse+mp3+driver+software/
ght

Hello, you can downloaded it at: www.nodevice.com/driver/category/MP3_Player.html

Regards, Jay

The volume button is the one under the center pause/ play (>II) button.
It may be marked VOL.

The manual does not give anymore information than that.

Try using short press or press and hold to change the volume.
This is a common method for using two functions on the one button

mine did this and when i went to the shop i got it from they said it was broken and replaced it for me not sure whether yours will be the same though
Hope this was of use B)

I think you should just format the mp3 player to reset all settings and start from scratch. Any issues you are having with your device, the format option should take care of it. I hope this helps you out!!!

Hello
Could be a corrupt download to the mp3 player.

Try reloading the third song,if it asks to overwrite answer yes.

If this still does not work then the third song file may be corrupt.

just plug into USB port and it will charge, 4 hrs charging will give you an hours use roughly.

You need to convert your CDs to MP3 music files or download the mp3 music files from the Internet to you computer and then copy them to your MP3 player. Please click on this link for instruction on converting CDs to mp3 music files
http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

u dont its just an ad

send back if you still have guarantee

The problem could be that the music files you copied were not in mp3 file format and that is it cannot see these music files.
You can download mp3 music files off the Internet to your computer and thne copy them to your player.
You can convert your CDs for free and copy them to your MP3 player. Please click on this link and follow my instructions :-
http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

music not playing

If you turn off the switch on the side of the unit, it wipes out your files. So you have to turn the unit off and on on the front face of the unit. I believe that you use the middle/PLAY button. That is supposed to save your files.

Call the mach help desk and they will be able to answer all of your questions 580-272-0035. I just called them a couple of minutes ago. The staff was very friendly and assisted me until my problem was resolved.