20 Most Recent DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder - Page 7 Questions & Answers

If the dish network remote control is universal it may work with limited functions. If the remote control has buttons labeled cd, receiver, cable or Aux etc. it might work. The manual will tell you for sure. It will also provide you with the proper code for the component to work.

SORRY BUT WE KNOW OF NO FIX FOR YOUR PROBLEM

This website: https://universalremote.codes/dish-network/

you need to ask the people from dish not diyer's

Contact dish to inquire. Their remote control may or may not contain the applicable code.

https://www.youtube.com/watch?v=iyvBW5H88ow

Here is the user guide for the remote: http://www.yamaha.com/yamahavgn/Documents/YEC/Other/RX-V567_Programing_remote_control_codes_for_TV_Control_Key_operations.pdf

No codes needed just use the TV pairing wizard under the remote control settings. See the guide below...

Call Dish and check if your service is active, then have them send a programming authorization hit to your 722.

See the website here:

Yellow plug in is the green on at the top.

Contact Dish customer support: 800-333-3474

Call Dish and have programming hit sent to your receiver. This will solve your problem.

See the guide:

Call Dish to have a tech visit set up for you.

See the guide attached below:

Just press the menu button on your remote or on the front panel of the 722.

NFL Network on DISH Network - Channel 154

Hook up your Dish receiver to HDMI 1 port on your TV. Press the input button on your TV remote to change the input to HDMI 1 and you should get a picture on your TV.

If you are not getting your local channels coming in on your 110 SAT, call Dish and have a tech come out and readjust your dish.