Top 20 Nokia 6720 Classic Cell Phone Questions & Answers

call 198 customer care.

RESETTING PHONE NOKIA:Soft Reset will clear pending errors and bring your mobile to an initial state by restoring Factory setting. To operate this function on your mobile, the shortcut is: *#7380# This function apparently works on almost all nokia mobile phonesHARD RESET:It may happen that despite you have restored your mobile to factory setting, the error still exist. In this case, it is recommended that you opt for Hard reset •Enter the code: *#7370# and press Yes to confirm initialization. •Important Notice: It is recommended that you save all important information on your phone (e.g: memo, contacts etc) •To make a Hard Reset on a Nokia phone that is not willing to turn on, just press simultaneously these 3 buttons: •on/off + * + 3 •Before making a Hard reset better backup all your important information: contacts , memo...etcFORMAT NOKIA:While my phone if power ON. Press the *7780# code, this code is usually used for the N60 series phone but this code is not working for nokia 5310. And I tried also another procedure again by doing this process:Your phone must be power off, press the "*" + "3? + "green call key" but nothings happen again I haven't format my phone.What should I do for this phone, this is able to recognize in the computer and cannot format to hard boot formatting.My last choice is to find a flash utility cable suits in my phone and the software to re-program it and putting some IMEI codes.

ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved

Hello My Friend:::First Option:Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved SoSecend Option:Your Phone Network IC Fault So Please change Network ICAnd Network Signal Problem will Solvedif it is there isn't much you can do on this side of the network.Contact your phone company.

First Download and Install Nokia PC Suite - Free software downloads and software reviews - CNET Download.com.connect your phone via usb by selecting Pc suite/Ovi suite.After this "Initialising synchronisation" is finished open Pc suite click to the Message Icon.Then you will see another interface click once to the particular message which you wish to delete.And delete it by clicking the delete icon, which is shown in the image

Hi,It is so simple to Unlock your Nokia 6720 .go this site order your Nokia Imei Unlock Code and get your imei unlock code.this site is offer best price.and guide you to how to enter your Nokia Imei Unlock Code.customer support is excellent. i hope t

I think the battery has problem. Chainge ur battery.

Menu - Settings - Themes - Standby - Basic...then hit 'horizontal icon bar' within the same menu (this just puts the selections for email/calender back on your home profile screen)Hope it worksIf not, backup everything to your mem card and restore factory settings

your battery is damaged. better you purchase a new one.

you can contact the mobile service provider...

If it is working when you press it harder,, there might be some corrosion(unclean) so if you can open the case just clean the points.Other wise you need to contact mobile repairing shop.Good luck thanks for visiting fixya

This trick is to generate your current security code using usb cable

.1. Downoad [ANT] Simple Ant Simple.zip.

2. If you have Nokia PC Suite running, be sure to close it by exiting from the taskbar icon.

2. Extract [ANT] Simple ] and run Simple.exe located in the folder

4. Connect the phone via USB to the computer

4. On the MAIN tab, click on GET. Your phone IMEI number and model should be displayed on the bottom panel as shown below

5. Now click on the SERVICE tab and click on GET button under USER CODE

6. Your security code should now be displayed on the right side of the application window

If you could not do please leave a testimony or comment below.Good luck

This problem occur when the phone gets dropped on a high place, water damage or setting on your mobile is changed.

Please follow this basic solution :

1. with the sim inserted on your phone, go to profile and select GENERAL. might you accidentally set your profile to offline mode.

2. check the simcard socket if its clean or well align,might corrosion is the problem that's why the sim fails to recognized.

3. Also clean the simcard itself using an pencil eraser.

4. align the battery terminal,might the power supply is not sufficient if the ground (middle terminal) doesn't reach the battery interface. as well as clean the battery connector.

If the above method doesn't work,consult a mobile service center for assistance,maybe the sim IC or some components related to insert sim problem maybe damage.


Good luck...

You can unlock your mobile yourself at home to unlock your Nokia model mobile using codes are the best way , why i am saying codes means to unlock your mobile with codes are simple & easy way,
Get the unlock code from this site www.onlinegsmunlock.com/nokia-6720-classic/rs7wp9 ,it has the best instructions and simple ways to unlock your mobile from the network lock..........If you unlock your phone using the unlock code then your phone gets permanently unlocked....After that, you can use it with any other network's sim card...........

install the latest version so as to have the best supporting driversthen check it outmake sure your bluetooth dongle works fine

Hi,

you just Select General Profile It will get start.


Regards,
Harish



// Feel free to vote this answer with 4 thumbs up & Testimonials //

Hi,
Try for default code 12345, 00000 or last 5 digits of your mobile no.
check this sites for your reference

click here

click here

If your phone still has vibration,it may be the problem with your speaker of your phone.
reset the phone and try again.
it may be you had damage to your phone(eg.drop off,water......ect)

Hi,

It is very simple.Just open the case remove the damaged LCD check the socket joining location.
You can see in the picture the copper socket.Place the LCD in the board.You have to insert it.


Example video to help you.

http://www.videojug.com/film/nokia-6280-lcd-screen-replacement-repair

Thank you for using fixya have a nice day:-)

Impossible.