20 Most Recent D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n - Page 8 Questions & Answers


https://youtu.be/Mop2Hrlj6_o here is a youtube video about this hope this works!

D-Link Computers... | Answered on May 07, 2016


ISP providers purposefully slow down your data. Its been a real fight to get the FCC and Congress to address this. Other than that, I suggest using you WAN. Only use cabled connections because they are much faster than the best radio.

D-Link Computers... | Answered on Apr 05, 2016


Try this video if you need more help message me.


D-Link Computers... | Answered on Mar 01, 2016


Um, no offense, but did you even read my message before posting that reply? I'm not having connection issues. There is nothing wrong with the wifi, or with the router's connection to the internet.
My problem is that, when I try to go to a URL that does not exist, e.g. http://no.such.url, instead of seeing a 'Could not find the sever specified' page, I get redirected to http://dlinkrouter/error-404.htm.
I'm confident that this issue is cause by the router, not by the ISP, since it is redirecting to a page served by the router itself.


for more help visit CBR Tech Solutions

D-Link Computers... | Answered on Nov 05, 2015


Step 1: Download and Run/Save the Error Repair Tool
Step 2: Next, click the SCAN button.
Step 3: Click the REPAIR button to fix your errors.


for more help visit CBR Tech Solutions

D-Link Computers... | Answered on Nov 04, 2015


Hi there. If you want a home router, the only one I know of is the Apple Airport Extreme - http://www.apple.com/airportextreme/specs.html?aosid=p204&siteid=1503186&program_id=2554&cid=OAS-EMEA-AFF&tduid=e7367d6ee6a689760197e36025f1756e . Any DD-WRT capable router can support it though, if you install the DD-WRT firmware. Check out this site for help with that - http://dd-wrt.com/site/index. Any professional series Cisco router will support it. I would be careful with IPv6 though - most ISPs don't support it yet. Good luck! Alex

D-Link Computers... | Answered on Sep 16, 2015


Basic steps to configure your router:
  1. Set Up IP Address and Sub-net Mask for their router.
  2. Now open the router Web Page by 192.168.0.1 in the browser URL.
  3. Login with your User Name and Password.
  4. For Manuall Configuration and Set-up router according to your ISP.
Router have different configuration according to Model. for more router support http://support.dlink.com/ and any router related technical support D-Link Router Support .

D-Link Computers... | Answered on Sep 16, 2015


Check to make sure you have the correct wifi password and that other devices can connect to the same wifi using that password. Power cycle your router. If those dont work might have to try changing the Wifi security encryption type to WPA or WPA2. Would need to login into your router to do this.

D-Link Computers... | Answered on Aug 24, 2015


http://www.dd-wrt.com/wiki/index.php/Known_incompatible_devices

D-Link Computers... | Answered on Jun 28, 2015


try dlink.com or just google the URL

http://support.dlink.com/emulators/wbr2310/lan.htm

D-Link Computers... | Answered on May 30, 2015


why doy you need cd rom, it is far easier to visit dlink website. below is their instructions for setting router manually, remove the extensions if they are not what you want

http://support.dlink.com/emulators/wbr2310/lan.htm

D-Link Computers... | Answered on May 30, 2015


visit dlink website, they have lots of advice. you can google the URLyou want

http://support.dlink.com/emulators/wbr2310/lan.htm

D-Link Computers... | Answered on May 30, 2015


Turn off your DSL/cable modem.
Turn it on.
Turn off your router.
Turn it on.
Reboot your computer.

D-Link Computers... | Answered on May 07, 2015


You "bricked" it -- responsibly recycle this "dead" unit, and replace it.

D-Link Computers... | Answered on May 07, 2015


Connect your computer to the router.
Assuming Windows 7, click the "Start" button.
Type 'cmd' into the search-box, and press ENTER.
Type 'IPCONFIG /ALL'.
Look for the IP-address of the "gateway" or "DHCP-server".
Type that IP-address into your web-browser.

D-Link Computers... | Answered on May 07, 2015


Reset the router to "factory default",
which resets the ID/password.
Then, reconfigure your router.

D-Link Computers... | Answered on May 07, 2015

Not finding what you are looking for?
D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n Logo

Popular Tags

34 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Mike

Level 3 Expert

4369 Answers

k24674

Level 3 Expert

8091 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

D-Link Computers & Internet

  • D-Link Computers & Internet

Most Popular Question

cannot access either dlinkap or

  • Computers & Internet
Loading...