20 Most Recent D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n - Page 3 Questions & Answers


Hi! this is Alex Walker expert to help you for this issue call me on +1(518)348-9393 I will be glad to assist you Thank You

D-Link Computers... | Answered on Jul 18, 2019


103 most popular error on DLink Modems and Routers.Error occurs when your computer or router is not able to find the internet connection. Reason behind settings of the modem or router.
Try to use :
  • "https" instead of "http" in the URLs.
  • Check Firewall is not blocking your internet connections.
  • Reset your modem or router.
For setting up and configure your router http://support.dlink.com/index.asp and D-Link Router Support for technical help.

D-Link Computers... | Answered on Jul 17, 2019


Hi, you need to log into your D-link router and then you van change your wifi password. in case you need any help mail me on [email protected]

D-Link Computers... | Answered on Mar 08, 2019


you have to try turning the hole lot off and restarting it i had this problem with putting mine and same with printers good luck should work

D-Link Computers... | Answered on Jan 19, 2019


If using lan just connect the extender to the router with a lan cable. The extender will no need to setup.

D-Link Computers... | Answered on Jan 17, 2019


Without providing a model number I can't be specific. Usually it is admin, admin or admin and no password.

D-Link Computers... | Answered on Jan 04, 2019


Should be able to hook it up to your computer with hard wire and put it in if you don't hook it up that way it won't work

D-Link Computers... | Answered on Dec 26, 2018


If you are facing issue while using Dir 618 configure as a bridge router then i recommend you to once read this blog to get understand the proper concept to use it : https://www.routertechnicalsupportnumbers.com/blog/fix-invalid-wi-fi-ip-configuration-issue-on-windows-10/

D-Link Computers... | Answered on Nov 21, 2018


You need to log into the router using either //router, routerlogin.net. or the IP address which is by default, 192.158.1.1 or 192.168.0.1
Default passwords can be found on the companies website, but many use admin and password

D-Link Computers... | Answered on Oct 29, 2018


Hi,

To clear cache manually try the following:

(1) start dos console by going to start > run > type "CMD" and press enter
(2) then type IPCONFIG /FLUSHDNS

If the above doesn't work then try the following THEN do the above step again:

~ Enabling DNS Cache Service ~

• To start the WinXP DNS Cache Service, click START -- RUN -- SERVICES.MSC -- Press ENTER.

• The Services console will appear.
• Navigate down the list of services until you find the one labeled DNS Client.
• Double click on DNS Client to open its properties pane. Set the Startup type to AUTOMATIC.
• Click APPLY and then click START to start this service.
• Retry the above step to manually clear your DNS Cache.
Thanks.

D-Link Computers... | Answered on Oct 05, 2018


Our technical expert solves more than 500+ issue every day.
we are available in every unapproachable location of USA/Canada. The customer can contact us any time, our technical
staff always ready to solve your all issue.
Therefore if you are facing any kind of issue which is mention
above so don't need to worry about it just Dial our Toll-free
Number D-Link Support Number USA 1-833-284-3444.
https://servicenumber.org/d-link.html

D-Link Computers... | Answered on Sep 25, 2018


There is a rest port on all drinks. You need a paperclip ir something similar to depress.hold down for a count I 5 5 1000 s and then lights will blink and reset.

D-Link Computers... | Answered on Aug 25, 2018


First check the LAN cable between the devices and try another cable. Reboot both devices.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Aug 16, 2018

Not finding what you are looking for?
D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n Logo

Popular Tags

34 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Mike

Level 3 Expert

4369 Answers

k24674

Level 3 Expert

8091 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

D-Link Computers & Internet

  • D-Link Computers & Internet

Most Popular Question

cannot access either dlinkap or

  • Computers & Internet
Loading...