20 Most Recent D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n - Page 11 Questions & Answers


you have to login to router and change the password manually

D-Link Computers... | Answered on Oct 05, 2014


you have to provide the username and password for the internet connection in the router .

login with the below information and give the username and password.

http://setuprouter.com/router/netgear/r6100/login.htm

D-Link Computers... | Answered on Oct 05, 2014


The internet speed all depend on the network depending on the company and the signal strength

D-Link Computers... | Answered on Oct 05, 2014


Please use the below link to find the hard reset.

http://routers.awordpress.net/routers/hard-reset-dlink-dir636l/

D-Link Computers... | Answered on Oct 05, 2014


copy and paste the below link to see the port forwarding.
http://portforward.com/english/routers/port_forwarding/Dlink/DSL-3780/Xbox_Live_360.htm

D-Link Computers... | Answered on Oct 05, 2014


which model router

D-Link Computers... | Answered on Oct 05, 2014


From Joe-Bob's handy-dandy reference:
(wikiedia...)

Normal magic squares exist for all orders n ≥ 1 except n = 2, although the case n = 1 is trivial—it consists of a single cell containing the number 1

The constant sum in every row, column and diagonal is called the magic constant or magic sum, M. The magic constant of a normal magic square depends only on n and has the value
13652227c2537f1018ce4d011d792db1.png For normal magic squares of order n = 3, 4, 5, …, the magic constants are:
15, 34, 65, 111, 175, 260, …

Computers &... | Answered on Sep 28, 2014


To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty.

D-Link Computers... | Answered on Sep 28, 2014


Routers are normaly shiped with the SSID on the back along withe the Pass key{password} if this has been alterd then you will need to conect up your router with a ethernet cable to a computer and open up you browser and type 192.168.0.1 this will take you to your router setup page you will need the admin password to change your ssid and passkey

D-Link Computers... | Answered on Sep 24, 2014


The best way to go about it is if you don't know the password is to factory reset your router. Then you can google what the default password is based on the model of yoy router. Once you know that you can login with the default password and change it.

D-Link Computers... | Answered on Sep 23, 2014


Plug into computer and enter IP address on label into web address bar or hold reset button for 10-20 sec to reset to factory settings.

D-Link Computers... | Answered on Sep 09, 2014


No Outlook email password is different, without knowing the incoming and outgoing address is not possible to configure outlook, which email service are you using check with them for incoming and outgoing mail server address

D-Link Computers... | Answered on Aug 25, 2014


If you're looking for the default username and password information for your D-Link DI-524, or perhaps how to reset it incase you've forgotten it, this website below outlines the lot of it.

Keep in mind, D-Link made a lot of revisions of this router, and one set of steps might work for one revision, and not on the other. Pay close attention to your revision. The article attached will outline where to find it (it's usually on a barcoded sticker on the underbelly of the unit).

http://pcsupport.about.com/od/d-link-default-passwords/a/di-524-default-password.htm

Hope this helps!

D-Link Computers... | Answered on Aug 25, 2014


Generally the MTU is set at 1450-1500. That can sometimes be manually changed to lower numbers to stabilize networks.

D-Link Computers... | Answered on Aug 21, 2014


Print size A3 is decided by printer (tray) + printer driver.
A print server does not decide print size.

D-Link Computers... | Answered on Aug 20, 2014


Depends on what you're looking at - if you're on a router, then the SSID is the network name that the router broadcasts (it shows up on your laptop/PC in the list of wireless networks) and you can set it up as anything you like. If you're on a PC/Laptop/Games Console then the SSID is the name of teh network you are trying to connect to. You shouldn't need to enter it as it should show up on the list of "available wireless networks"

D-Link Computers... | Answered on Aug 18, 2014


The wireless password for a router is established by the administrator of the router. This is whom you should ask for the password. Hacking into the router wont help you find it because the password is not displayed...it is a series of dots. You CAN, if you access the router setup, CHANGE the wireless password to something you can use - but if you are hoping to piggyback or hack onto someones service using their wireless password, you're out of luck.

D-Link Computers... | Answered on Aug 15, 2014


You need to download firmware with Chinese version from DLink

D-Link Computers... | Answered on Aug 14, 2014


Have you entered the wifi password on the tablet?

D-Link Computers... | Answered on Aug 14, 2014

Not finding what you are looking for?
D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n Logo

Popular Tags

34 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Mike

Level 3 Expert

4372 Answers

k24674

Level 3 Expert

8091 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

D-Link Computers & Internet

  • D-Link Computers & Internet

Most Popular Question

cannot access either dlinkap or

  • Computers & Internet
Loading...