Polycom CX700 IP Phone - Answered Questions & Fixed issues


what you need to do, is update the firmware of the device.

This is a good guide:

http://www.ocspedia.com/Misc/Update_Server_Check_List_R2.htm

Polycom CX700 IP... | Answered on Feb 10, 2011 | 929 views


Voicemail systems are a function of the PBX that the phone is connected to, not the phone itself. If you do not have administrative access to the PBX, there is no way to reset the password from the phone unless you know what the password currently is. What kind of premise PBX or hosted PBX service is the phone connecting to?

Polycom... | Answered on Jan 02, 2015 | 281 views


Without knowing what phone .... I would say "Press DND" again

Polycom... | Answered on Oct 20, 2014 | 126 views


Transmission circuit is responsive, however the speaker seems to be defective or the receiver section has failed. This is an internal function whereby the unit requires inspection by a technician to correct the issue at hand.

Polycom... | Answered on Feb 26, 2014 | 71 views


If you know how eo access your configuration control panel then assign a Static IP address or place that assigned address on the other side of the firewall (DMZ). Steve Medley

Polycom... | Answered on Nov 07, 2008 | 140 views


Here's some info: E-mail message saved by Microsoft Outlook or other e-mail program; may also contain an e-mail attachment, or file sent with the message. Note: If EML files will not open in Outlook Express, try the following:
  1. Open My Computer.
  2. Select Folder Options from the Tools menu.
  3. Click the File Types tab.
  4. Under Registered file types, select EML Outlook Express Mail Message, then click Advanced.
  5. Click Open, then click Edit.
  6. Type the following line in the "Application used to perform action" box:
    "C:\Program Files\Outlook Express\MSIMN.EXE" /eml:%1
  7. Click OK twice, then close the window.
EML files may also be opened in Internet Explorer since they are formatted the same as .MHT files; changing the file extension from ".eml" to ".mht" should cause the file to open directly in Internet Explorer.
Hope this helps.

Computers &... | Answered 2 hours ago | 326 views


Search the manufacturer/distributor website.

Computers &... | Answered 16 hours ago | 16 views


Be more specific please? What's your video format, codec, frame rate? Which media player are you using? What processor, gpu, ram system are you running?

There is a big possibility that your video is not compatible with your media player or your current hardware. For example, you have a HEVC encoded video, but your player has no support on HEVC codec, or your computer is not available to play it. In this case, you need a HEVC converter to transcode HEVC to H.264 for better compatibility. Check the guide here: https://www.winxdvd.com/windows-10/best-h265-hevc-video-converter.htm

Computers &... | Answered Yesterday | 31 views


Request the manual from Zennox.

Computers &... | Answered Yesterday | 16 views


Use a known good anti virus programme like Malwarebytes, the free software.

Computers &... | Answered Yesterday | 16 views


Computer unplugged from power, Anti-Static Precautions FOLLOWED, remove the CMOS battery.

Press the Power On button in, and hold it in for a count of 10 seconds. Count, 1001,..1002,..1003,..etc. Let go of the Power On button.

Do this same procedure two more times. Now reinstall the CMOS battery. (Positive -> + sign on battery always goes UP)

What you are doing is clearing CMOS Error Codes. Now try again.

Also make sure in BIOS Setup utility, and in Boot Options, that you set the first boot device to CDROM.

Plus, is the HDD cable plugged in correctly? Some of the cables do not have a Locating lug on the connector, for an IDE (PATA) data cable.

The faint red stripe on the side marks Pin 1. Pin 1 ALWAYS goes toward the power cable connection, on the harddrive.

Pin 1 is usually marked on the motherboard connector. (You also want IDE 1, or Primary, for the motherboard connector)

http://en.wikipedia.org/wiki/File:Nappe.svg

http://en.wikipedia.org/wiki/Parallel_ATA

SATA data cable can be plugged into ANY SATA data connector, on the motherboard. BIOS will find the SATA device.

Regards,
joecoolvette

Computers &... | Answered Yesterday | 86 views


go to your acc and settings. you can do it

Computers &... | Answered Yesterday | 19 views


You've most likely heard the words "cloud computing" thrown around before and maybe you have an idea of what they are, but possibly not a clear idea. In short, cloud computing or cloud-based solutions include a variety of ways to safely store and manage business data with web-based accessibility. This way of storing files and data have become quite popular for many companies and has replaced physical file and storage rooms.

Many companies have switched over to this type of data storage because of the quick and convenient access it provides to them and should something happen to their office building or space, their sensitive data will remain safe and still accessible, which also helps them avoid a slough of legal problems in the event of a disaster.

Computers &... | Answered 2 days ago | 65 views


Unknown if this web page below can be of assistance. May be simply an advertisement.

https://www.cloudcodes.com/blog/casb-help-organizations-pii-compliance.html

Computers &... | Answered 2 days ago | 23 views


OS X, Windows version? Linux? Software for documents?

Computers &... | Answered Yesterday | 21 views

Not finding what you are looking for?
Polycom CX700 IP Phone Logo

Popular Tags

2 questions posted

Ask a Question

Usually answered in minutes!

Top Polycom Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Darren  Means
Darren Means

Level 2 Expert

46 Answers

Tom Chichester

Level 3 Expert

55643 Answers

Are you a Polycom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...