20 Most Recent
Emerson Quiet Kool 10NW16K Air Conditioner - Page 6 Questions & Answers
184d4a
Possible lack of lubrication or accumulation of dirt. It is best to remove panel and check for dirt, if so a good wash before lubrication of the FAN and moving parts must solve this issue. Use a degreasing spray like WD40 on the motor shaft and fan.
I have an Emerson (4 Speed) direct drive blower
There should be a wiring diagram on the motor itself. The colors of the wires vary depending on voltage and model. Generally you have a med/low and med/high setting, I'm not sure what you are getting to with the low/high setting unless you are trying to set up staging. Check the motor for a diagram, if that is not present post back with all of the wire colors coming from the motor and the voltage.
Emerson quiet cool air conditioner
Make sure you do not have it on fan and have it set on cool/cold. Otherwise you may need to have the it recharged by a h-vac professional. Also you can try clean the filters and the compresser/condenser (the part that is out side. Sometimes Dirt can keep your unit from working to it full potential.
Not finding what you are looking for?