20 Most Recent Ganz DR4NC-160 DVR DIGITAL VIDEO RECORDER CCTV USED Questions & Answers

cara reset nvr tel view

Hello

After system boot-up, hold a right mouse click

button and there will be login window. Hold a left

mouse button to click the order of "Account", and

input correct account. Then left click the order of

"Password" and input correct password. At last

left click "Login" to enter system. There is one

factory-preset login "account/password"
"admin/111111" at admin level. The user can
use it to login the system for the first time

ou can reach our Customer Service Departments directly at:

• East Coast: 1 (800) 422-6707 (9:00 am - 5:00 pm EST)
• West Coast: 1 (877) 407-9555 (7:00 am - 5:00 pm PST)
• Mexico: +52 (55) 5280 4660 (9:00 am - 6:00 pm Central {UTC 06:00})

HOW TO VIDEO

rest pasword

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/ System reset procedure to many popular brand video recorders are given.

Have one did the same, tried to boot up when powered up, then started beeping. Found bad hard drive, replaced all ok.

Depends on which side of the router the DVR is on. If it's inside(meaning no access from the internet) then type in the address of the DVR on a web brouser to see the video. If you are trying for internet access then you need to assign a port in the dvr setup. Then you must forward that port in the router so it can be seen from the internet.