20 Most Recent Kenmore 24 in. 16693 Built-in Dishwasher - Page 6 Questions & Answers

It’s made by Whirlpool Corp. Ask them

I am guessing that you are talking about a dishwasher? Based on the information you provided it sounds like you have a broken hinge.

How to Reset the Control Pannel for a Kenmore Dishwasher Quiet Guard 2

1. Unlock the dishwasher control panel before resetting it. ...
2. Press the following sequence of control panel buttons in quick succession: "Heated Dry," "Normal Wash," "Heated Dry" and "Normal Wash."
3. Allow the dishwasher to perform a brief diagnostic tes

That's not a valid model number. how you know it's error 15?

Sorry but you not say what make you have, just go and google it

Most dishwashers get plugged full of bits of food/napkins/broken glass. Suggest removing all trays, look for filters at the bottom. Many videos on YT that show various models, similar for each manufacturer.
I clean mine once a year or so.

Possible pump failure or control module failure.

Usually it would be a pump issue, acessible under the dishwasher. Could be the be the impeller alone, but ussually need to be repalce with the motor as well. Get a pan, water will get out and rarely pleasant smell ;)

It could be a timer, relay or valve actuator overheating. You are smart to worry about a fire ANYTIME you smell something hot like that. I wouldn't use it until you get it checked out. GOOD LUCK!!!

Probably as the heater cuts in and means the element will need replacing.

Could be that top spray arm needs replacing if it has one. Or maybe it’s not getting enough water and water valve needs replacing or maybe the bottom spray arm is no longer telescoping and needs replacing

Which sub model Elite? Fault or failure codes are usually machine specific. THe generic e25 means the drain is clogging. Clear the drain and rinse before washing any more dishes - remove food debris before loading it to prevent a reoccurrence.

Try unplugging it, or if you can't unplug it, turn the breaker off at the breaker box and leave it off for about 10 minutes to reset the values on the dishwasher. Good luck...

Take two screws out of the baseboard cover and remove it. There should be a Tech Sheet there in a plastic pouch which will show what error 25 means and that may help you determine how to fix the problem. It will also explain how to Reset the machine and make the error code go away, at least until the next time it detects the error. Usually the reset is done by pressing and holding a certain pair of buttons on the control panel.

https://www.searspartsdirect.com/partsdirect/user-manuals/66513743k601-kenmore-parts-manual

This is part # wp8066018

Take bottom spray arm out and motor / pump cover off. You should be able to see it. Can be tricky getting new one back in place.

I did the same thing recently. I've been trying to get it fixed, but it doesn't seem to drain completely. Were you able to get yours fixed with the last answer that was posted? http://www.benfranklinplumbingmorganton.com/sewer-and-drain-cleaning-hickory/