20 Most Recent
Kenmore 24 in. 16539 Built-in Dishwasher - Page 6 Questions & Answers
Kenmore ultra dishwasher the top rack is not getting any water? cleaning
The first thing to do is visually check to make sure the water connections from the sump assembly to the top spray arm is all in good shape and connected, also make sure the spray arms ports are clear of any foreign material. Make sure that the top rack is seating properly to the water tube in the back of the machine. If this is all good it is possible that the diverter valve is malfunctioning. If it comes down to the diverter valve I would recommend that an authorized repair company assist you as they can be a trick and quite involved.
9/10/2019 2:45:30 PM •
Kenmore...
•
Answered
on Sep 10, 2019
This is a 15972 that does not drain. I think the
The first question I have is did this issue start after a garbage disposal was installed? There is a plug in a new disposal that needs to be removed. If this is not the case the easiest thing to do is pull the dishwasher out. Be careful not to damage the floor or countertop. Tip the dishwasher back and put a cakepan or something under the drain pump to keep the mess to a minimum.
Remove the drain pump. Make sure you check the impeller is not loose on the shaft or broken and of course clean the ports.
I hope this helps.
9/10/2019 2:03:35 PM •
Kenmore...
•
Answered
on Sep 10, 2019
Kenmore trash compactor wont close foot pedal broken
This is a job that you can do, but take your time. First there is a pedal repair kit that you will need. I have attached a link that will help you with that.
As the compactor is heavy be careful not to damage the floor when you remove it and of course make sure it is unplugged before starting for safety. I recommend sitting it on a packing blanket or rug. Then remove the kick/toe panel and follow the directions in the repair kit. Plug in and test before reinstalling.
http://www.directparts.com/
9/10/2019 1:55:08 PM •
Kenmore...
•
Answered
on Sep 10, 2019
Not finding what you are looking for?