Top 20 Apex Digital LD4088 LCD TV Questions & Answers

0helpful
1answer

Can you help me with my tv problem

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/
4/2/2016 6:21:23 PM • Apex Digital... • 68 views • 0 helpful votes
0helpful
2answers

My TV cuts itself on and off so can you help me or not

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
4/2/2016 6:22:37 PM • Apex Digital... • 58 views • 0 helpful votes
0helpful
1answer

My TV keep turning it self off and some time it urns back on by itself.

main power supply regulator section faulty. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
4/2/2016 6:05:25 PM • Apex Digital... • 55 views • 0 helpful votes
0helpful
1answer

Bought a sony remote and it will not pick up you codes listed. need code for apex

Sony remote control have no set-up code to Apex brand devices. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites Check this site too. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.
2/25/2016 7:33:38 PM • Apex Digital... • 67 views • 0 helpful votes
0helpful
1answer

I'm trying to hook up a 2-3 year old APEX Digital TV that I bought from a friend. I've gone through the set up options, but cannot get any volume at all. Any suggestions how to fix this?

Check whether the audio is muted by accidental press at remote control button. Enter its sound menu, and check it. If muted, as you know there will be no audio output. If not muted, check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
1/17/2016 4:12:06 AM • Apex Digital... • 113 views • 0 helpful votes
0helpful
1answer

Is the main board bad on my TV?

Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Fault at its main digital board. Short circuited component/s at it.
1/15/2016 10:15:02 PM • Apex Digital... • 79 views • 0 helpful votes
0helpful
2answers

I muted my tv it wont unmute i have no sound help

make sure your remote works, replace batteries and check again with tv.
7/5/2015 11:10:21 PM • Apex Digital... • 1,506 views • 0 helpful votes
0helpful
1answer

Arrows on picture on rear projecrion tv what are they for?

If you are meaning the little arrows that are on the back of the cover, they are showing what screws need to be taken out to remove the cover, Can you post the model number of this television?
10/25/2015 11:22:41 AM • Apex Digital... • 69 views • 0 helpful votes
0helpful
1answer

Why does it have a black screen and no audio?

Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
6/27/2015 2:13:13 AM • Apex Digital... • 104 views • 0 helpful votes
0helpful
1answer

APEX LD4088 service menu (advanced menu)

Try this:
  • Turn the TV off.
  • Press and hold the {VOL -} button ON THE TV and the {TV/VIDEO} button on the remote for at least 5 seconds.
  • The TV will turn on with the Service Menu displayed.
Here's how to access the SM:
  • While the TV is in standby:
  • Press the {DISPLAY}, {5}, {VOL+} & {POWER} buttons.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_70466cb634a57543
11/29/2014 10:32:21 PM • Apex Digital... • 3,854 views • 0 helpful votes
0helpful
1answer

Have a 4 year old flat screen Apex. Turn it on have audio but black screen. Checked, unplugged and re plugged everything. A couple of time the picture came back hours later and days later but not at a

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/
1/19/2015 5:27:05 PM • Apex Digital... • 138 views • 0 helpful votes
0helpful
1answer

My hdmi port are not working on my apex digital tv how can I fix this action

If the firmware to HDMI haven't installed, the HDMI ports won't work. Contact the authorized service centre; or any experienced service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
11/9/2014 5:06:49 PM • Apex Digital... • 720 views • 0 helpful votes
0helpful
1answer

GANZKLAR REMOTE CODE

0039,0033,0031,0036. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/
8/18/2014 5:55:29 AM • Apex Digital... • 1,481 views • 0 helpful votes
0helpful
1answer

How can i fix my Apex tv. It flashes on and off in component 1&2. It says no signal when it's dark.

Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
10/21/2014 12:08:22 AM • Apex Digital... • 191 views • 0 helpful votes
5helpful
3answers

I dont have a remote for my APEX tv. I have been trying to change the input from AV to TV but as I scroll through inputs I can't get it to stay on the input I want. Help?

I know this is old but I figured I can post an answer for anyone else looking for a solution. I don't have a remote for my Apex tv and wanted to switch it from TV input to Hdmi 1 to use it as a monitor. You have to press INPUT button to get the menu up. Then press CHANNEL+ or CHANNEL- to change to the input that you want. Then press and HOLD the VOLUME+ button to enter it. That worked for my Apex TV.
5/19/2014 12:02:37 AM • Apex Digital... • 10,172 views • 5 helpful votes
0helpful
1answer

Is there a headphone jack on this model?

No. There is not. Electro help
9/28/2014 8:53:42 AM • Apex Digital... • 86 views • 0 helpful votes
0helpful
1answer

I need 9 digit antenna code for Apex LD4077M to hook up antenna?

Most likely code: 10767 Others to try: 10765, 10748, 10879, 10890, 11991, 10889 To program your Comcast remote:
  1. Turn on the TV or other device that you would like to program.
  2. Press the TV button on your remote control. NOTE: If you would like to program your remote control to work with a DVD Player, VCR or Audio device press the AUX button.
  3. Press and hold Setup until the red light blinks twice, then release Setup.
  4. Enter the first code for your device listed above. If you perform this procedure correctly, the red light will blink twice. NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 4 with a valid code.
  5. Aim the remote control at your device and press Power once (press the Play key for devices that don't have a POWER button). If the TV turns off, make sure that the VOL+/- and Mute buttons also work. If so, you're all set!
  6. If not, repeat these steps using the next manufacturer's code (you may need to try several codes to find the one that works).
If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_70466cb634a57543
8/4/2014 10:31:12 PM • Apex Digital... • 206 views • 0 helpful votes
0helpful
1answer

How do I get out of the zoom mode?

Refer its user manual for details. http://electronicshelponline.blogspot.com/
9/18/2014 7:06:42 PM • Apex Digital... • 63 views • 0 helpful votes
0helpful
1answer

When I turn off my TV and then turn it back on it always goes back to the TV input and it never remembers the settings I set before I turned it off, how to I fix this?

After selecting each inputs, you should press OK / (Enter) button on the remote control to save the settings. Please refer its user manual for details. If you can't, means, the main system control memory IC is faulty; it do not holds the LPM {Last Position Memory}. If so, you should replace it. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/
6/18/2014 3:04:46 AM • Apex Digital... • 77 views • 0 helpful votes
0helpful
1answer

I have an Apex ld4088. The ir sensor is not working. How do I change this out and what is the part number?

It sounds that the remote control is working well, and the fault is with the infrared sensor inside the TV. There are so many types of sensors are used with different brand TVs, and you should make sure about the type and its number. This component can be located just behind the infrared window at the front of the TV, to take it out, you have to open the TV. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ fcf3588c-4188-4c4c-b950-2d910c5f1e24.jpg The component will look somewhat like this, and the procedure to replace it is descirbed in one among the posts, in the above linked site.
3/15/2014 11:16:16 PM • Apex Digital... • 275 views • 0 helpful votes
Not finding what you are looking for?
Apex Digital LD4088 LCD TV Logo

288 questions posted

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Apex Digital Televison & Video

  • Apex Digital Televison & Video

Most Popular Question

dont remote apex tv trying change input

  • Televison & Video
Loading...