Top 20 Sharp Holster Belt Clip for Sidekick LX 2009 T-Mobile SHARP Questions & Answers

You can search it in Google, it is fast to find your destination

If the phone is tied to a particular network all you have to do is to unlock your phone to use it any other GSM network. You can get the unlock code through online. Give your IMEI number & get the unlock code for ur mobile .............You also get through online..........I will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.

You can get the code from service provider and Unlock it

You can get the Unlock Code at here http://www.unlocking4u.com/supported-phones/rs6wp7/

Get the Unlock code at here
http://www.mobileunlocksolutions.com/sidekick/rs1wp8/ and Unlock it....

You can get the subsidy unlock code from your wireless provider for free, that will allow you to use the handset on another network.

It says just Network lock only,You need to enter the Code if it locked Network mean.You can get the Unlock code at here
http://www.superunlockcodes.com/sidekick-lx-2009/rs12wp9/ and Unlock it,get the Unlocking Instructions below to unlock it step by step.
Sidekick LX 2009 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Sidekick LX 2009 mobile phones. If you enter over a certain amount of wrong unlock codes on your Sidekick LX 2009 mobile phone, your phone may get hard locked and sometimes become unusable.
1. Switch ON your Sidekick LX 2009 with a Not ACCEPTED SIM Card.
2. If your Sidekick LX 2009 asks for a PIN code, then enter your SIM card PIN and press OK.
3. Sidekick LX 2009 will ask to enter an "unlock code".
4. Enter Unlock Code we send to you.
5. Your Sidekick LX 2009 is now unlocked.

*NOT ACCEPTED : We mean, to use a Sim card from a network other than the network your Sidekick LX 2009 is locked to.
Each Sidekick LX 2009 mobile phone has an unique unlock code. You can buy the unique unlock code for your Sidekick LX 2009 mobile phone using the form above.

A request for a PUK code ("Personal Unlocking Key") will appear on your phone if your SIM card PIN code is entered 3 consecutive times incorrectly.

Your SIM card will then become "PUKed" or Blocked. This is a security measure to protect your service.

You need to call the Customer Service department of your cell phone provider and they will give you the PUK code which will unblock your SIM card.

hi honestperson try country code here http://www.onlinegsmunlock.com/

i dont know the puk code and forgot my account information.. can u help me

THE ONLY OPTION FOR THIS IS A HARD RESET WHICH WILL DELETE ALL DATA.
Hard Reset
1. Press the Menu button.
2. Scroll to and select Settings
3. Scroll to and select System Info
4. Press the Menu, Shift and X keys simultaneiously.
5. Select Erase to erase the flash settings.
6. At the System Info screen, press the Menu, Shift and R keys simultaneously.
7. Select Erase to erase the Sign-In information.
8. Insert a paper clip in the reset hole while holding down the Power button.

Note: The device vibrates if all steps are performed correctl

Dear please enter code 12345 or 1122 or 0000 if these are not accepted then please reinstall its software. Problem will be quickly solved. Regards

call metro and take out the battery and tell them the numbers on the back of ur ph.

Hi. I can help. Your unlock code depends on your phone's IMEI or serial number. You can call your service provider and sometimes they will give you the code for free.

Using an unlock screen is easy. Enter the code. but, there are two types of code, A Subscriber set pass code or A PUK Code, aka a SIM Lock Which do you have? Click Comment. ..

if this is the machine your talking about check out this link to the user manual it may have the answer. if not then you may have broken wire/s in that display. this user manual may have contact info in it so you might ask the mfg. about the issue. good luck. https://www.manualslib.com/manual/571166/Sharp-Fv-Db1e.html

You should take it to an authorized technical center. It look's like an protective mode. Maybe some electr?nico component inside it's broken...

It is very easy to do. You just follow these steps and that's it. * Go to settings * Go to the Privacy * Now you will see an option "Factory Data Reset" (Click on it) * Then Click on "Erase Everything" after that, your device will reboot itself and it will perform an operation which will reset your data from the factory.

do u mean hard reset google it it will show a few videos how to hard reset it

No, it uses a power adapter, available at below: http://www.calculatorsource.com/s-adapter.html You can also search out a printer ribbon for it. This handles 10 digit calculations.